首页 | 本学科首页   官方微博 | 高级检索  
     检索      

改性酚醛基复合材料的摩擦系数研究
引用本文:庄光山,王成国,王海庆,孙毅.改性酚醛基复合材料的摩擦系数研究[J].航空材料学报,2003,23(3):42-45.
作者姓名:庄光山  王成国  王海庆  孙毅
作者单位:山东大学材料科学与工程学院,山东,济南,250061
基金项目:山东省重点资金(Z99F03)
摘    要:研制了一种准高速列车盘形制动装置用混杂纤维增强改性酚醛基复合材料,在1:1惯性力矩试验台上研究了在干摩擦条件下以不同制动初速度、不同闸片压力实施惯性制动时的摩擦特性,利用扫描电镜对试验后的材料摩擦表面形貌进行观察。试验结果表明:瞬时摩擦系数随瞬时速度的变化与制动初速度有关,高接触压力下的摩擦系数低于低接触压力下的摩擦系数;在于摩擦、一次停车惯性制动条件下,临界使用条件是接触压力为0.82MPa,制动初速度为27.3m/s。摩擦表面生成摩擦膜是摩擦系数变化的主要原因。

关 键 词:摩擦  复合材料  制动
文章编号:1005-5053(2003)03-0042-04
修稿时间:2002年11月18

Study on friction coefficient of a aodified phenolic basis composition
ZHUANG Guang-shan,WANG Cheng-guo,WANG Hai-qing,SUN Yi.Study on friction coefficient of a aodified phenolic basis composition[J].Journal of Aeronautical Materials,2003,23(3):42-45.
Authors:ZHUANG Guang-shan  WANG Cheng-guo  WANG Hai-qing  SUN Yi
Abstract:A hybrid fibers reinforced modified phenolic basis composition used for disc brake equipment of para-high speed train was studied , and its tribologic characteristics under dry condition with different initial braking speeds and normal stresses were studied on the Friction & Wear Tester for Railway Rolling Stocks, the morphology of friction surface after braking was studied by SEM, the results show that the change of instantaneous friction coefficient vs instantaneous velocity influenced by initial speed and the friction coefficient went down with contact stress increasing; the critical condition for application under dry friction and brake to stop condition was 0. 82 MPa contact stress and 27. 3 m/s initial speed; the main reason for change of friction coefficient was the friction film formed on friction surface.
Keywords:friction  composition  brake
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号