首页 | 本学科首页   官方微博 | 高级检索  
     

涡桨发动机安装节拉杆系统力学分析
引用本文:文敏,解梦涛,张强,雷晓波. 涡桨发动机安装节拉杆系统力学分析[J]. 航空发动机, 2017, 43(5). DOI: 10.13477/j.cnki.aeroengine.2017.05.013
作者姓名:文敏  解梦涛  张强  雷晓波
作者单位:中国飞行试验研究院,西安,710089
摘    要:基于涡轮螺旋桨发动机安装节拉杆系统,对各拉杆的受力状态进行分析,推导拉杆系统力学方程,并得到拉杆之间的力学关系,结果显示各拉杆所受拉力比值为常数,该常数仅取决于拉杆的尺寸、安装角度、材料参数等。基于ANSYS Workbench建立拉杆系统有限元模型,对该系统进行静力学分析得到拉杆应变随拉力的变化关系,并得到不同拉杆拉力之间的关系,数值仿真结果与理论分析结论相互印证。为基于安装节拉杆的涡桨发动机飞行拉力测量奠定技术基础。

关 键 词:安装节  拉杆系统  力学分析  涡桨发动机  飞行拉力

Mechanical Analysis of Tie Rod System for Turboprop Engine
WEN Min,XIE Meng-tao,ZHANG Qiang,LEI Xiao-bo. Mechanical Analysis of Tie Rod System for Turboprop Engine[J]. Aeroengine, 2017, 43(5). DOI: 10.13477/j.cnki.aeroengine.2017.05.013
Authors:WEN Min  XIE Meng-tao  ZHANG Qiang  LEI Xiao-bo
Abstract:The stress state of each rod was analyzed based on the tie rod system of turboprop engine mounting. The mechanical equation of tie rod system was deduced and the mechanical relationship between the rods was obtained. The results show that the tension ratio of each rod is a constant and the constant depends only on the size of the rod, installation angle, material parameters. Finally, the finite element model of tie rod system was established based on Ansys Workbench, the static analysis of the system was performed to obtain the variation relation of the rod tension strain with the tension. The relation between the tensions of different pull rods was obtained. The numerical simulation results and the theoretical analysis conclusions confirmed each other. It is the technical foundation for the measurement of the flight tension of propeller engine based on the installation rod.
Keywords:installation section  tie rod system  mechanical analysis  turboprop engine  flying force
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号