| 陶瓷刀具切削高温合金试验研究 |
| |
| 引用本文： | 马天宇,王宇,李玉甫,于明明,张佳奕.陶瓷刀具切削高温合金试验研究[J].航空精密制造技术,2012(1):38-40,53. |
| |
| 作者姓名： | 马天宇 王宇 李玉甫 于明明 张佳奕 |
| |
| 作者单位： | 哈尔滨理工大学机械工业切屑控制与高效刀具重点实验室 |
| |
| 基金项目： | 国家科技重大专项(2010ZX04014-051,2010ZX 04012-21);黑龙江省自然科学基金重点项目(ZD201005) |
| |
| 摘 要： | 本文通过对陶瓷刀片车削镍基高温合金GH4169机理的研究,得到了切削速度、进给量和切削深度对切削力及切削温度和表面粗糙度的影响,进而优化切削工艺。借助olympus的3D测量激光共焦显微镜,得到了刀片的磨损形貌,并对其做了简要分析。
|
| 关 键 词： | 陶瓷刀片 高温合金 工艺参数优化 |
Research on Cutting High Temperature Alloy by Ceramics Tool |
| |
| Institution: | MA Tian-yu,WANG Yu,LI Yu-fu,et al.(Harbin University of Science &Technology,Harbin 150080) |
| |
| Abstract: | Influence about cutting force,temperature and surface roughness by cutting rate,feed and depth to was obtained by researching cutting high temperature alloy GH4169 by ceramics blade to optimization process.The ware topography of blade was obtained and analyzed by using olympus 3D measurement laser confocal microscope.The cutting parameter range was obtained by optimization test.The result showed that the cutting condition was selected. |
| |
| Keywords: | ceramics blade high temperature alloy processing parameter optimization |
| 本文献已被 CNKI 等数据库收录！ |
|
