| 新型半发散结构的冷却特性参数研究 |
| |
| 引用本文： | 李威,唐明,李长林,严传俊.新型半发散结构的冷却特性参数研究[J].航空动力学报,1995,10(2):159-162,201. |
| |
| 作者姓名： | 李威 唐明 李长林 严传俊 |
| |
| 作者单位： | 西北工业大学;西北工业大学;西北工业大学;西北工业大学 |
| |
| 摘 要： | 根据席壁冷却的传热模型, 采用数值迭代法, 对席壁的冷却特性参数即壁面热效率和壁面温比进行了计算。结果表明, 席壁的冷却特性参数主要受壁面多孔度和冷却剂热容数的影响, 边界换热条件的影响不显着。与已有的实验数据相比较, 计算结果与之基本符合。
|
| 关 键 词： | 发散冷却 参数 传热计算 |
| 收稿时间： | 6/1/1994 12:00:00 AM |
| 修稿时间： | 1994/10/1 0:00:00 |
STUDY ON COOLING PARAMETERS OF A NEW SEMI TRANSPIRATION COOLING SCHEME |
| |
| Li Wei,Tang Ming,Li Changlin and Yan Chuanjun.STUDY ON COOLING PARAMETERS OF A NEW SEMI TRANSPIRATION COOLING SCHEME[J].Journal of Aerospace Power,1995,10(2):159-162,201. |
| |
| Authors: | Li Wei Tang Ming Li Changlin and Yan Chuanjun |
| |
| Institution: | 7th Dept.Northwestern Polytechnical University,Xian 710072;7th Dept.Northwestern Polytechnical University,Xian 710072;7th Dept.Northwestern Polytechnical University,Xian 710072;7th Dept.Northwestern Polytechnical University,Xian 710072 |
| |
| Abstract: | The mat wall cooling is a new semi transpiration cooling scheme.A heat transfer model of the mat wall cooling is established and a numerical iteration method is employed to calculate its cooling parameters (i.e.thermal effectiveness and wall temperature ratio) in the porosity range from 0 0204 to 0 0625.It is shown that the cooling parameters are affected mainly by the porosity and coolant flow number,and the boundary conditions have insignificant effect.The calculated results are consistent with the existed experimental data.This fact indicates that the presented heat transfer model is principally adequate,but must be further improved for more accurate prediction. |
| |
| Keywords: | Heat transfer computation Parameters Transpiration cooling |
|
| 点击此处可从《航空动力学报》浏览原始摘要信息 |
| 点击此处可从《航空动力学报》下载免费的PDF全文 |
|
