| 移动登机桥举升机构设计 |
| |
| 引用本文： | 周立鹏,张晓丽,邢志伟. 移动登机桥举升机构设计[J]. 中国民航学院学报, 2009, 27(3): 23-25 |
| |
| 作者姓名： | 周立鹏 张晓丽 邢志伟 |
| |
| 作者单位： | 周立鹏,张晓丽,ZHOU Li-peng,ZHANG Xiao-li(天津工程机械研究院,天津,300384);邢志伟,XING Zhi-wei(中国民航大学航空自动化学院,天津,300300) |
| |
| 基金项目： | 天津市科技发展计划项目 |
| |
| 摘 要： | 移动登机桥举升叉架受力分析计算，突破叉架结构的传统手工计算。借助于现代设计方法，在初步确定该结构的参数基础上，采用SolidWorks软件三维建模，通过COSMOSMotion插件对其工作机构进行运动学仿真；在COSMOSworks模块中，按照实际工况对模型进行约束及加栽、划分网格等操作，进行机构的结构有限元分析，校核该机构的结构参数，提高了举升叉架的设计效率和安全可靠性。通过实地试验，验证该机构参数的合理性及该方法的可信度。
|
| 关 键 词： | 移动登机桥 SolidWorks 叉架 有限元 |
Design of Lifting Machine of Airport Lift Bus |
| |
| ZHOU Li-peng,ZHANG Xiao-li,XING Zhi-wei. Design of Lifting Machine of Airport Lift Bus[J]. Journal of Civil Aviation University of China, 2009, 27(3): 23-25 |
| |
| Authors: | ZHOU Li-peng ZHANG Xiao-li XING Zhi-wei |
| |
| Affiliation: | ZHOU Li-peng ,ZHANG Xiao-li ,XING Zhi-wei ( 1. Tianjin Research Institute of Construction Machinery, Tianjin 300384, China; 2. College of Aeronautical Automation, CA UC, Tianjin 300300, China) |
| |
| Abstract: | Analysis and calculating of lifting forked machine of airport lift bus breakthrough traditional hand work. By modem design method, on base of parameters of the machine estimated, three-dimensional model is made by software of SolidWorks. Kinematic simulation of work machine can be made by COSMOS motion. In module of COSMOS works, according to real operating condition, operations !ike restricting and loading are put on the model. After meshing the module can do finite element analysis of the machine. The parameters of the machine are checked. This method can improve design efficiency, safety and reliability of lifting forked machine. The rationality of the configuration parameters and the reliability of the method are proved through field test. |
| |
| Keywords: | SolidWorks |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
