TA15钛合金电子束焊平行焊缝形貌及显微组织研究 |
| |
引用本文: | 张庆云,李晋炜,陆业航,李众城.TA15钛合金电子束焊平行焊缝形貌及显微组织研究[J].航空制造技术,2011(16). |
| |
作者姓名: | 张庆云 李晋炜 陆业航 李众城 |
| |
作者单位: | 北京航空制造工程研究所 |
| |
摘 要: | 对TA15钛合金厚板电子束焊接均匀焊缝即熔合线近似平行的焊缝的电子束焊接工艺进行了研究,获得了一系列均匀焊缝的焊接工艺方法。选用加速电压为140kV、焊接速度600mm/min,聚焦电流318mA和338mA,电子束流43mA和50mA的工艺条件获得了2种形状的焊缝。研究结果表明,电流越大,焊缝显微组织越粗大,热影响区越宽,接头显微硬度曲线也越平滑。
|
关 键 词: | 钛合金 电子束焊接 焊缝形貌 平行焊缝 |
Research on Morphology and Microstructure of Parallel Welding Seam of TA15 Titanium Alloy EB Welding |
| |
Abstract: | Two different parallel welding seam of TA15 Titanium alloy EB welding joints are obtained by using the right parameter under140kV accelerated voltage,600mm/min velocity,318mA and 338mA focus current,43mA and 50mA electron beam current.The result shows that high current results in the coarser grain size,wider heat affected zone and smoother microhardness curve. |
| |
Keywords: | Titanium alloy Electron beam welding Welding morphology Parallel welding seam |
本文献已被 CNKI 万方数据 等数据库收录! |
|