基于ANSYS的参数化薄壁件加工变形分析与计算 |
| |
引用本文: | 李光,陈五一,张平. 基于ANSYS的参数化薄壁件加工变形分析与计算[J]. 航空制造技术, 2011, 0(19): 76-79 |
| |
作者姓名: | 李光 陈五一 张平 |
| |
作者单位: | 1. 北京航空航天大学 2. 中航工业沈阳黎明航空发动机(集团)有限责任公司 |
| |
摘 要: | 随着对航空产品性能要求的进一步提高,现代航空工业中广泛使用薄壁件零件.由于薄壁件零件刚度差,在加工过程中极易发生变形.建立了参数化薄壁件加工过程有限元模型,借助有限元软件ANSYS 10.0对薄壁件加工变形量进行分析计算研究.由于ANSYS本身功能有限,不能提供较为友好的图形化界面输入,所以基于C#环境完成了ANSYS...
|
关 键 词: | 参数化建模 ANSYS 薄壁件 加工变形量 C# |
Analysis and Calculation on Machining Deformation of Parameterized Thin-Wall Workpiece Based on ANSYS |
| |
Abstract: | With higher demanding to reduce the weight of aviation products,many components used in the aviation industry usually adopt thin-wall structures.But,because of its poor stiffness,thin-wall workpiece deforms easily in machining process.So finite element model of parameterized thin-wall workpiece in machining process is estabilished and the machining deformation of thin-wall workpiece is calculated by using FEM software ANSYS 10.0.Because ANSYS can't provide a relatively friendly graphical interface,a seconda... |
| |
Keywords: | Parameterized modeling ANSYS Thin-wall workpiece Machining deformation C# |
本文献已被 CNKI 万方数据 等数据库收录! |
|