首页 | 本学科首页   官方微博 | 高级检索  
     检索      

测向交叉定位系统中的最优交会角研究
引用本文:白晶,王国宏,王娜,徐海全.测向交叉定位系统中的最优交会角研究[J].航空学报,2009,30(2):298-304.
作者姓名:白晶  王国宏  王娜  徐海全
作者单位:海军航空工程学院 信息融合技术研究所
基金项目:国家自然科学基金(60541001);;全国优秀博士学位论文作者专项基金(200443,200237);;“泰山学者”建设工程专项经费
摘    要:研究了测向交叉定位系统中的最优交会角问题。在目标到两部被动传感器基线之间的垂直距离不同的情况下和最小圆概率误差(CEP)准则下,得出了一些有意义的结论。研究表明,最优交会角跟目标到两部传感器基线的垂直距离与基线长度的比值l有关。当l≥√3/6时,只存在一个最优交会角且此时目标与两部被动传感器呈等腰三角形,并在此情况下分析了l的变化对圆概率误差的影响。当l<√3/6时,存在两个相等的最优交会角。得出的结论在多个被动传感器的优化配置进而提高目标定位精度方面具有一定的理论和实际意义。

关 键 词:传感器  概率  拉格朗日乘子  导数  计算机仿真  最优交会角  
收稿时间:2007-11-06
修稿时间:2008-03-06

Study on Optimum Cut Angles in Bearing-only Location Systems
Bai Jing,Wang Guohong,Wang Na,Xu Haiquan.Study on Optimum Cut Angles in Bearing-only Location Systems[J].Acta Aeronautica et Astronautica Sinica,2009,30(2):298-304.
Authors:Bai Jing  Wang Guohong  Wang Na  Xu Haiquan
Institution:Research Institute of Information Fusion, Naval Aeronautical and Astronautical University
Abstract:This article is concerned with the optimum cut angle in bearing-only location systems.By applying the criterion of minimum circular error probability(CEP) to the condition of different vertical distances between the target and the baseline of two passive sensors,some useful conclusions concerning the optimum cut angle are obtained.The optimum cut angle is dependent on l,the ratio of the vertical distance to the baseline length.If l is greater than or equal to 3~(1/2)/6,there is one optimum cut angle and the...
Keywords:sensor  probability  Lagrange multipliers  derivatives  computer simulation  optimum cut angle  
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《航空学报》浏览原始摘要信息
点击此处可从《航空学报》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号