Material parameter modeling and solution technique using birth–death element for notched metallic panel repaired with bonded composite patch |
| |
基金项目: | supported by the National Natural Science Foundation (No. 51075019);Aeronautical Science Foundation of China (No. 20095251024) |
| |
摘 要: | This paper seeks to outline a novel three-layer model and a new birth–death element solution technique to evaluate static strength of notched metallic panel repaired with bonded composite patch and to optimize material parameters. The higher order 3D, 8-node isotropic solid element and 8-node anisotropic layered solid element with three degrees of freedom per node are respectively implemented to model substrate panel, adhesive layer and composite patch to establish three-layer model of repaired panel. The new solving technique based on birth–death element is developed to allow solution of the stress pattern of repaired panel for identifying failure mode. The new model and its solution are used to model failure mode and residual strength of repaired panel, and the obtained results have a good agreement with the experimental findings. Finally, the influences of material parameter of adhesive layer and composite patch on the residual strength of repaired panel are investigated for optimizing material properties to meet operational and environmental constraints.
|
关 键 词: | Birth–death element Bonding Bonding repair Composite patch Residual strength Three-layer model |
收稿时间: | 26 March 2013 |
Material parameter modeling and solution technique using birth-death element for notched metallic panel repaired with bonded composite patch |
| |
Authors: | Tong Lei Li Shiqiu Xiong Junjiang |
| |
Institution: | School of Transportation Science and Engineering, Beihang University, Beijing 100191, China |
| |
Abstract: | This paper seeks to outline a novel three-layer model and a new birth-death element solution technique to evaluate static strength of notched metallic panel repaired with bonded composite patch and to optimize material parameters. The higher order 3D, 8-node isotropic solid element and 8-node anisotropic layered solid element with three degrees of freedom per node are respectively implemented to model substrate panel, adhesive layer and composite patch to establish three-layer model of repaired panel. The new solving technique based on birth-death element is developed to allow solution of the stress pattern of repaired panel for identifying failure mode. The new model and its solution are used to model failure mode and residual strength of repaired panel, and the obtained results have a good agreement with the experimental findings. Finally, the influences of material parameter of adhesive layer and composite patch on the residual strength of repaired panel are investigated for optimizing material properties to meet operational and environmental constraints. |
| |
Keywords: | Birth-death element Bonding Bonding repair Composite patch Residual strength Three-layer model |
本文献已被 CNKI 维普 ScienceDirect 等数据库收录! |
| 点击此处可从《中国航空学报》浏览原始摘要信息 |
| 点击此处可从《中国航空学报》下载免费的PDF全文 |