| GC－4高强度钢化学短裂纹特性研究 |
| |
| 引用本文： | 王荣,路民旭,郑修麟.GC－4高强度钢化学短裂纹特性研究[J].航空学报,1994,15(6):749-752. |
| |
| 作者姓名： | 王荣 路民旭 郑修麟 |
| |
| 作者单位： | 西北工业大学401教研室,西安,710072 |
| |
| 摘 要： | 采用恒ΔＫ法对ＧＣ－４钢在３．５％ＮａＣｌ溶液中化学短裂纹特性进行了试验研究。结果表明：恒ΔＫ时裂纹扩展的ｄａ／ｄＮ－ａ曲线存在临界裂纹尺寸ａ。当ａ＜ａ时,显示化学短裂纹效应。ａ值几乎不受加载频率、应力比和ΔＫ水平的影响；化学短裂纹特征扩展速率与长裂纹扩展速率之比是各种力学参量的弱函数。依据分析给出化学短裂纹扩展速率与裂纹尺寸之间的关系。
|
| 关 键 词： | 应力强度因子 化学性质－短裂纹 临界点－裂纹几何形状 裂纹扩展 |
| 收稿时间： | 1992-08-03 |
| 修稿时间： | 1993-02-17 |
AN INVESTIGATION OF CHEMICAL SHORT CRACK CHARACTERISTICS IN GC-4 HIGH-STRENGTH STEEL |
| |
| Wang Rong, Lou Minxu,Zhen Xiulin.AN INVESTIGATION OF CHEMICAL SHORT CRACK CHARACTERISTICS IN GC-4 HIGH-STRENGTH STEEL[J].Acta Aeronautica et Astronautica Sinica,1994,15(6):749-752. |
| |
| Authors: | Wang Rong Lou Minxu Zhen Xiulin |
| |
| Institution: | Faculty 401 of Northwestern Polytechnical University,Xi’3n.710072 |
| |
| Abstract: | method of constant ΔK value is applied experimentally to investigate chemical short crack characteristics in GC-4 high-strength steel in3.5% NaCl solution. experimental results show that there is a critical crack size a on da/dN-a curve of the crack propagation at constant ΔK value. When crack size a < a, chemical short crack effect appears. Loading frequency,stress ratio and ΔK value almost have no effect on a value. The ratio of characteristic crack propagation rate of chemical short crack to that of long crack is a weak function of foading fre-quency,stress ratio and ΔK value. Based on the analysis, the relation between the short crack propagation rate and crack size has been put forward. |
| |
| Keywords: | stress intensity factors chemical properties short cracks critical point-crack geome-try crack propagation |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《航空学报》浏览原始摘要信息 |
| 点击此处可从《航空学报》下载免费的PDF全文 |
