| 气膜孔形状对导叶冷却效果影响的数值研究 |
| |
| 引用本文： | 姚玉,张靖周,郭文.气膜孔形状对导叶冷却效果影响的数值研究[J].航空动力学报,2008,23(9):1666-1671. |
| |
| 作者姓名： | 姚玉 张靖周 郭文 |
| |
| 作者单位： | 南京航空航天大学能源与动力学院,南京,210016 |
| |
| 摘 要： | 根据导向叶片的曲面结构,运用剪应力输运方程(SST)湍流模型,针对簸箕形、锥形和缝形气膜孔的流场和冷却特性同圆形气膜孔进行了对比研究.研究结果为:随着冷气入口压力的增加,各种冷却结构的冷却效果也在增加;而在相同的冷气入口压力条件下,各种形状气膜孔的冷却流量和冷却效果不尽相同,在该研究条件下,簸箕形和缝形气膜孔的冷却效果最好,锥形孔次之.
|
| 关 键 词： | 涡轮叶片 气膜冷却 数值计算 |
| 收稿时间： | 2007/9/12 0:00:00 |
| 修稿时间： | 2007/12/6 0:00:00 |
Numerical study of cooling effectiveness of different film cooling holes on stator blade |
| |
| YAO Yu,ZHANG Jing-zhou and GUO Wen.Numerical study of cooling effectiveness of different film cooling holes on stator blade[J].Journal of Aerospace Power,2008,23(9):1666-1671. |
| |
| Authors: | YAO Yu ZHANG Jing-zhou and GUO Wen |
| |
| Institution: | College of Energy and Power Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China;College of Energy and Power Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China;College of Energy and Power Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China |
| |
| Abstract: | The flow field and film cooling characteristics on the blade surface were numerically investigated using the shear-stress transport(SST) two-equation turbulent model,so as to understand the influences of film-cooling holes on cooling effectiveness.The flow and cooling effectiveness for four configurations of film cooling holes were compared.Results show that the cooling effectiveness for each film cooling hole increases with the increment of the coolant entrance total pressure.Under the same coolant entrance total pressure,the cooling effectiveness of the dustpan and slot film cooling holes are the best,followed by that of the taper film cooling hole. |
| |
| Keywords: | turbine blade film cooling numerical computation |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《航空动力学报》浏览原始摘要信息 |
| 点击此处可从《航空动力学报》下载免费的PDF全文 |
|
