| 模压绝热接头成型过程压力控制研究 |
| |
| 引用本文： | 苏胜良%赵剑平%郭晓东%徐春雷.模压绝热接头成型过程压力控制研究[J].宇航材料工艺,2007,37(2):38-40. |
| |
| 作者姓名： | 苏胜良%赵剑平%郭晓东%徐春雷 |
| |
| 作者单位： | 内蒙动力机械研究所,呼和浩特,010010 |
| |
| 摘 要： | 论述了模压过程中压力大小、加压方法对固体火箭发动机模压绝热接头成型质量的影响,试验结果表明模压绝热接头较理想的成型压力为2．5～8 MPa。同时合理考虑流胶余量和模具流胶结构,选择恰当的压力,有利于提高成型工艺的可操作性和稳定性。
|
| 关 键 词： | 固体火箭发动机 模压 硫化 压力控制 橡胶 |
| 修稿时间： | 2006-06-05 |
Pressure Control Research on Forming Process of Molding Insulated Joint |
| |
| Su Shengliang,Zhao Jianping,Guo Xiaodong,Xu Chunlei.Pressure Control Research on Forming Process of Molding Insulated Joint[J].Aerospace Materials & Technology,2007,37(2):38-40. |
| |
| Authors: | Su Shengliang Zhao Jianping Guo Xiaodong Xu Chunlei |
| |
| Institution: | Dynamic Machinery Institute of Inner Mongolia,Huhhot 010010 |
| |
| Abstract: | The effects of the pressure level and pressuring method on product forming quality in a solid propel- lant rocket motor insulated joint molding process are discussed in this paper.The test results indicate that the ideal forming pressure used for the molding insulated joint is from 2.5 MPa to 8 MPa.The best pressure to improve the fea- sibility and stability of the forming process of the molding insulated joint is discussed as well. |
| |
| Keywords: | SRM Moulding Vulcanization Pressure controlling Rubber |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《宇航材料工艺》浏览原始摘要信息 |
| 点击此处可从《宇航材料工艺》下载免费的PDF全文 |
