| 基于电子展成与坐标结合原理自动测量圆柱齿轮的研究 |
| |
| 引用本文： | 吴玉梅,张琳,朱利强,郭俊杰,张渝嘉.基于电子展成与坐标结合原理自动测量圆柱齿轮的研究[J].宇航计测技术,2002,22(4):17-21. |
| |
| 作者姓名： | 吴玉梅 张琳 朱利强 郭俊杰 张渝嘉 |
| |
| 作者单位： | 1. 西安理工大学,陕西,710048
2. 长安汽车集团有限责任公司,重庆,400000 |
| |
| 摘 要： | 介绍了利用电子展成与坐标结合的原理来自动测量渐开线圆柱齿轮的方法。采用CNC技术实现电子展成 ,利用被测齿形的测量值进行分析与评价。为了消除传动误差 ,在电子展成系统中设有误差修正环节
|
| 关 键 词： | +电子展成法 +电子齿轮 +CNC 自动测量 误差修正 |
| 文章编号： | 1000-7202(2002)04-0017-05 |
| 修稿时间： | 2001年10月29 |
The study of automatic measuring gear based on integration of the electronic generative metrology and coordinate |
| |
| Wu Yumei,Zhang Lin,Zhu Liqiang,Guo Junjie,Zhang Yujia.The study of automatic measuring gear based on integration of the electronic generative metrology and coordinate[J].Journal of Astronautic Metrology and Measurement,2002,22(4):17-21. |
| |
| Authors: | Wu Yumei Zhang Lin Zhu Liqiang Guo Junjie Zhang Yujia |
| |
| Institution: | Wu Yumei 1 Zhang Lin 1 Zhu Liqiang 1 Guo Junjie 1 Zhang Yujia 2 |
| |
| Abstract: | Present a method of automatic measuring gear based on integration of the generative metrology and coordinate. Achieve electronic generative metrology by adoption CNC technology. Analyze and evaluate the gear errors in terms of the measured values. In order to eliminating drive system errors, device errors correction in this system. |
| |
| Keywords: | Electronic generative metrology Electronic gear CNC Automatic measure Error correction |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
