| 电机定子装配应力研究 |
| |
| 引用本文： | 陈小勇,郑涛,张宇程. 电机定子装配应力研究[J]. 导航与控制, 2012, 0(2): 62-64 |
| |
| 作者姓名： | 陈小勇 郑涛 张宇程 |
| |
| 作者单位： | 北京航天控制仪器研究所;北京航天控制仪器研究所;北京航天控制仪器研究所 |
| |
| 摘 要： | 电机定子在装配应力作用下出现开裂现象，这是导致其装配合格率低的主要原因。本文通过对影响定子开裂的因素分析，从电机定子的结构特性、整形方法、灌胶温度等方面开展研究，总结出了降低装配应力的关键工艺方法，提高了电机定子验收合格率。
|
| 关 键 词： | 装配应力；定子裂纹；合格率；工艺研究 |
A Research on Assembly Stress of Motor Stator |
| |
| CHEN Xiao-yong,ZHENG Tao and ZHANG Yu-cheng. A Research on Assembly Stress of Motor Stator[J]. Navigation and Control, 2012, 0(2): 62-64 |
| |
| Authors: | CHEN Xiao-yong ZHENG Tao ZHANG Yu-cheng |
| |
| Affiliation: | Beijing Institute of Aerospace Control Device;Beijing Institute of Aerospace Control Device;Beijing Institute of Aerospace Control Device |
| |
| Abstract: | Motor stators cracking because of assembly stress, it leads to the main reason for their low pass rate. This paper analyzes the error factors to the crack by studying the structure, shaping method and glue temperature of the motor stator. The paper summarizes the key technology on reducing the assembly stress. In the end, it significantly improves the stator pass rate. |
| |
| Keywords: | assembly stress stator crack pass rate technology research |
|
| 点击此处可从《导航与控制》浏览原始摘要信息 |
|
点击此处可从《导航与控制》下载全文 |
