| 基于可编程逻辑控制器的超声电机测试系统设计 |
| |
| 引用本文： | 郑伟,黄伟彬,周景亮,阮玉镇.基于可编程逻辑控制器的超声电机测试系统设计[J].航空动力学报,2018,45(1):123-126, 130. |
| |
| 作者姓名： | 郑伟 黄伟彬 周景亮 阮玉镇 |
| |
| 作者单位： | 福建工程学院 机械与汽车工程学院,福建 福州350118;南京航空航天大学 精密驱动研究所,江苏 南京210016,福建工程学院 机械与汽车工程学院,福建 福州350118,福建工程学院 机械与汽车工程学院,福建 福州350118,福建工程学院 机械与汽车工程学院,福建 福州350118 |
| |
| 基金项目： | 国家自然科学基金项目(51275228)；福建工程学院科研基金项目(GYZ09059) |
| |
| 摘 要： | 为了给工程技术人员提供易于操控的超声电机特性测试设备,设计了基于可编程逻辑控制器(PLC)的测试系统。根据超声电机常用的特性要求,利用力矩传感器输出的脉冲信号,通过PLC的高速输入口,用梯形图实现力矩和转速的采集和显示。通过可编程逻辑控制器配套的人机界面,实现了触摸屏对超声电机的测试进行操作。测试系统能够完成超声电机机械特性测试、超声电机自动加减载测试、超声电机带负载起动特性测试和超声电机手动测试等4种模式。通过试验对该系统进行验证,达到易于操作的要求。
|
| 关 键 词： | 超声电机 可编程逻辑控制器 测试系统 机械特性 人机界面 |
Design of Ultrasonic Motor Testing System Based onProgrammable Logic Controller |
| |
| ZHENG Wei,HUANG Weibin,ZHOU Jingliang and RUAN Yuzhen.Design of Ultrasonic Motor Testing System Based onProgrammable Logic Controller[J].Journal of Aerospace Power,2018,45(1):123-126, 130. |
| |
| Authors: | ZHENG Wei HUANG Weibin ZHOU Jingliang and RUAN Yuzhen |
| |
| Institution: | School of Mechanical & Automotive Engineering, Fujian University of Technology, Fuzhou 350118, China;Precision drive technology laboratory, Nanjing University of Aeronautics and Astronautics,Nanjing 210016, China,School of Mechanical & Automotive Engineering, Fujian University of Technology, Fuzhou 350118, China,School of Mechanical & Automotive Engineering, Fujian University of Technology, Fuzhou 350118, China and School of Mechanical & Automotive Engineering, Fujian University of Technology, Fuzhou 350118, China |
| |
| Abstract: | A test system based on programmable logic controller (PLC) was designed to provide engineering and technical personnel with easy to handle characteristics testing equipment of ultrasonic motor. The pulse signal of the torque sensor was output to the highspeed input port of the PLC. According to the testing requirements of ultrasonic motor, the torque and rotation speed were tested and displayed by using the ladder diagram, through the pulse input of torque sensor. Through the manmachine interface of programmable logic controller, the touch screen controls the testing of the ultrasonic motor. The testing system could complete four kinds of modes, such as the mechanical characteristic test of ultrasonic motor, automatic loading and unloading test, ultrasonic motor starting characteristic test with load and ultrasonic motor manual test. The system was verified by experiments. The system was easy to operate. |
| |
| Keywords: | ultrasonic motor programmable logic controller (PLC) test system mechanical properties human machine interface |
|
| 点击此处可从《航空动力学报》浏览原始摘要信息 |
| 点击此处可从《航空动力学报》下载免费的PDF全文 |
|
