| 黏接界面试件拉伸变形破坏过程的数字散斑相关方法分析 |
| |
| 引用本文： | 姜爱民,李高春,郭宇,邱欣,王玉峰.黏接界面试件拉伸变形破坏过程的数字散斑相关方法分析[J].航空动力学报,2014,29(5):1242-1248. |
| |
| 作者姓名： | 姜爱民 李高春 郭宇 邱欣 王玉峰 |
| |
| 作者单位： | 海军航空工程学院 飞行器工程系, 山东 烟台 264001;海军航空工程学院 飞行器工程系, 山东 烟台 264001;中国航天科工集团公司 六院四十一所, 呼和浩特 010010;海军航空工程学院 飞行器工程系, 山东 烟台 264001;海军航空工程学院 飞行器工程系, 山东 烟台 264001 |
| |
| 摘 要： | 对黏接界面试件拉伸变形破坏过程进行了观察,通过编制数字散斑相关方法(DSCM)处理图像,提取得到试件表面随着载荷变化而变化的位移场和应变场及其演化过程.结果表明:带预制脱黏黏接界面试件在拉伸过程中,由于预制脱黏尖端附近产生应变集中将产生起裂.DSCM能较好地应用于黏接界面试件表面的变形和破坏分析中,定量测量了界面变形场,并与试验结果相吻合.
|
| 关 键 词： | 黏接界面 数字散斑相关方法 变形破坏 变形场 固体火箭发动机 |
| 收稿时间： | 2013/10/24 0:00:00 |
Investigation on adhesive interface specimen deformation and failure process under tension using digital speckle correlation method |
| |
| JIANG Ai-min,LI Gao-chun,GUO Yu,QIU Xin and WANG Yu-feng.Investigation on adhesive interface specimen deformation and failure process under tension using digital speckle correlation method[J].Journal of Aerospace Power,2014,29(5):1242-1248. |
| |
| Authors: | JIANG Ai-min LI Gao-chun GUO Yu QIU Xin and WANG Yu-feng |
| |
| Institution: | Department of Aircraft Engineering, Naval Aeronautical and Astronautical University, Yantai Shangdong 264001, China;Department of Aircraft Engineering, Naval Aeronautical and Astronautical University, Yantai Shangdong 264001, China;The 41st Institute of the 6th Academy, China Aerospace Science and Industry Corporation, Hohhot 010010, China;Department of Aircraft Engineering, Naval Aeronautical and Astronautical University, Yantai Shangdong 264001, China;Department of Aircraft Engineering, Naval Aeronautical and Astronautical University, Yantai Shangdong 264001, China |
| |
| Abstract: | The deformation and failure process of adhesive interface specimen under tension was observed. By digital speckle correlation method (DSCM) to deal with images, displacement and strain field of speciman surface varying with load and their evolution process were achieved. The results show that during the tensile process the adhesive interface specimen with stress-release flap could be vulnerable crack at the tip of stress-release flap because of strain concentration. DSCM is an effective experimental method for studying characteristic of deformation and failure of adhesive interface specimen. The quantificational measurement results of adhesive interface deformation field are consistent with the data obtained from the experiment. |
| |
| Keywords: | adhesive interface digital speckle correlation method deformation and failure deformation field solid rocket motor |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《航空动力学报》浏览原始摘要信息 |
| 点击此处可从《航空动力学报》下载免费的PDF全文 |
|
