| 复合固体推进剂拉伸/压缩性能对比研究(英文) |
| |
| 引用本文： | 任萍,侯晓,何高让,郜婕,何铁山.复合固体推进剂拉伸/压缩性能对比研究(英文)[J].宇航学报,2010,31(10). |
| |
| 作者姓名： | 任萍 侯晓 何高让 郜婕 何铁山 |
| |
| 作者单位： | 1. 西北工业大学航天学院,西安,710072
2. 中国航天科技集团公司第四研究院第四十一所固体火箭发动机燃烧、热结构与内流场国防科技重点实验室,西安,710025 |
| |
| 摘 要： | 为了获得药柱受压状态的模量参数,开展了推进剂压缩性能的探索测试。参照拉伸标准试件,进行了压缩试件尺寸的设计与调试,通过不同高度试件的测试结果及破坏形貌分析,确定了试件尺寸。在此基础上进行了不同应变下的推进剂拉/压对比测试。相同应变率下,压缩模量较拉伸模量高,压缩模量随压缩速度的变化规律与拉伸模量一致,随着速度的提高,模量随之提高。
|
| 关 键 词： | 推进剂 拉伸 压缩 初始模量 |
Comparative Research of Tensile and Compressive Modulus of Composite Solid Propellant for Solid Rocket Motor |
| |
| REN Ping,HOU Xiao,HE Gao-rang,GAO Jie,HE Tie-shan.Comparative Research of Tensile and Compressive Modulus of Composite Solid Propellant for Solid Rocket Motor[J].Journal of Astronautics,2010,31(10). |
| |
| Authors: | REN Ping HOU Xiao HE Gao-rang GAO Jie HE Tie-shan |
| |
| Abstract: | In order to get the modulus of composite solid propellant under compression state,compression tests are carried out. The specimen is designed for compression tests with reference to the standard tensile specimen. Through analysis of a lot of test results and failure modes to different specimen,the size of specimen is determined. Based on the determined dimension,comparative test of tension and compression are performed under different strain rates. Compressive modulus are higher than tensile modulus at the ... |
| |
| Keywords: | Composite solid propellant Tension Compression Initial modulus |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
