锯齿冠低压涡轮工作叶片叶冠防错位设计方法 |
| |
引用本文: | 左铭,杨养花,张志述.锯齿冠低压涡轮工作叶片叶冠防错位设计方法[J].航空发动机,2018,44(3):36-41. |
| |
作者姓名: | 左铭 杨养花 张志述 |
| |
作者单位: | 中国航发沈阳发动机研究所 |
| |
基金项目: | 航空动力基础研究项目资助 |
| |
摘 要: | 针对锯齿冠低压涡轮工作叶片在使用过程中发生的叶冠错位故障,在综合分析各次叶冠错位故障发生原因的基础上,总结了锯齿冠低压涡轮工作叶片叶冠错位模式,绘制了模式图,并针对各种叶冠错位模式提出了1套完整的锯齿冠低压涡轮工作叶片预防叶冠错位的设计方法。在2型发动机上进行应用的结果表明,本方法是切实可行的。
|
关 键 词: | 锯齿冠:低压涡轮工作叶片 预防错位 航空发动机 |
Dislocation Preventing Methods of Shroud Shaped Saw Tooth
of Low Pressure Turbine Blade |
| |
Authors: | ZUO Ming YANG Yang-hu ZHANG Zhi-shu |
| |
Institution: | ZUO Ming, YANG Yang-hua, ZHANG Zhi-shu |
| |
Abstract: | Aiming at the failure of Saw tooth shaped shroud dislocation caused by the operation of low pressure turbine working blade,
based on a comprehensive analysis of the causes of each dislocation fault, the dislocation pattern of the saw tooth of pressure turbine
working blade was summarized, and the model chart was drawn. Then blad complete design method was proposed to prevent the Saw tooth
shaped shroud dislocation of the low pressure turbine. The application results on two different type engine show that this methods is feasible. |
| |
Keywords: | saw tooth shaped shroud low pressure turbine blade cause analyses and dislocation preventing methods aeroengine |
本文献已被 CNKI 等数据库收录! |
| 点击此处可从《航空发动机》浏览原始摘要信息 |
| 点击此处可从《航空发动机》下载免费的PDF全文 |
|