基于载荷当量安装误差的面齿轮振动特性 |
| |
引用本文: | 王延忠,唐文,兰州,初晓孟,刘旸. 基于载荷当量安装误差的面齿轮振动特性[J]. 航空动力学报, 2018, 33(4): 989-998. DOI: 10.13224/j.cnki.jasp.2018.04.026 |
| |
作者姓名: | 王延忠 唐文 兰州 初晓孟 刘旸 |
| |
作者单位: | 北京航空航天大学 机械工程及自动化学院,北京 100191 |
| |
基金项目: | 国家自然科学基金(51275020);国家科技支撑计划课题(2014BAF08B01);技术基础科研项目(Z132014xx) |
| |
摘 要: | 以面齿轮传动系统为研究对象,考虑载荷作用下面齿轮传动系统中支撑结构变形和轮齿弹性变形,通过将传动系统变形等效到面齿轮和直齿轮安装误差方向,建立包含当量安装误差的面齿轮多自由度耦合振动分析模型;采用4阶Runge-Kutta法求解了面齿轮传动系统运动微分方程,得到了当量安装误差对面齿轮振动加速度和法向动态啮合力的影响;开展了面齿轮动态特性测试试验,试验结果表明:偏置距误差和轴交角误差引起的面齿轮沿x方向振动加速度大于沿z方向振动加速度;偏置距误差对面齿轮x方向振动加速度的影响大于轴交角误差。
|
关 键 词: | 面齿轮 当量安装误差 振动特性 动态响应 振动加速度 |
收稿时间: | 2016-10-23 |
Vibration characteristic for face gear based onload equivalent installation errors |
| |
Abstract: | Considering the support structure deformation and tooth elastic deformation of the face gear drive, a multi degree of freedom coupling vibration analysis model including equivalent installation errors was established by converting the transmission deformation into installation errors. Fourth order Runge-Kutta method was adopted to solve the differential equation of face gear drive. The influences of equivalent installation errors on the vibration acceleration and the dynamic meshing force of the face gear were obtained. The dynamic characteristics experiments for face gear drive were performed. The experimental results showed that the vibration acceleration along x direction caused by offset and shaft angle error was larger than that along z direction. The influence of vibration acceleration along x direction caused by offset error was larger than that caused by shaft angle error. |
| |
Keywords: | face gear equivalent installation error vibration characteristic dynamic response vibration acceleration |
本文献已被 CNKI 等数据库收录! |
| 点击此处可从《航空动力学报》浏览原始摘要信息 |
|
点击此处可从《航空动力学报》下载全文 |