| 超音频脉冲TIG焊电源拓扑及电弧焊适用性 |
| |
| 引用本文： | 齐铂金,许海鹰,黄松涛,张伟. 超音频脉冲TIG焊电源拓扑及电弧焊适用性[J]. 北京航空航天大学学报, 2009, 35(1): 61-64 |
| |
| 作者姓名： | 齐铂金 许海鹰 黄松涛 张伟 |
| |
| 作者单位： | 北京航空航天大学机械T程及自动化学院,北京,100191;北京航空航天大学机械T程及自动化学院,北京,100191;北京航空航天大学机械T程及自动化学院,北京,100191;北京航空航天大学机械T程及自动化学院,北京,100191 |
| |
| 摘 要： | 研制出一台超音频直流脉冲TIG(Tungsten Inert Gas)焊电源,对该电源的拓扑结构及工作原理进行了介绍.与常规直流TIG焊电源相比,该电源可输出不同频率、均具有陡峭的上升、下降沿的脉冲电流,电流变化率大于50A/μs.该电源的基值电流、峰值电流、脉冲电流频率、占空比等焊接工艺参数调节方便,使该电源不仅能够焊接薄板,而且能够适用于中厚板的焊接.通过对比常规直流TIG焊和超音频直流脉冲TIG焊焊接的1Cr18Ni9Ti奥氏体不锈钢焊缝的微观组织,发现采用超音频直流脉冲TIG焊工艺的焊缝粗晶区变窄,晶粒细化现象显著.试验结果表明:所研制的超音频脉冲TIG焊电源具有良好的弧焊适用性.
|
| 关 键 词： | 超音频脉冲 TIG焊 细化晶粒 |
| 收稿时间： | 2008-02-18 |
Ultrasonic frequency pulse tungsten inert gas welding power source topology and welding applicability |
| |
| Qi Bojin,Xu Haiying,Huang Songtao,Zhang Wei. Ultrasonic frequency pulse tungsten inert gas welding power source topology and welding applicability[J]. Journal of Beijing University of Aeronautics and Astronautics, 2009, 35(1): 61-64 |
| |
| Authors: | Qi Bojin Xu Haiying Huang Songtao Zhang Wei |
| |
| Affiliation: | School of Mechanical Engineering and Automation, Beijing University of Aeronautics and Astronautics, Beijing 100191, China |
| |
| Abstract: | An ultrasonic frequency pulse tungsten inert gas welding power source was developed.The power source topology and work principle were introduced.By contrast with current waves output from conventional tungsten inert gas welding power source,faster rising and falling pulse current edges were output from this power source at every ultrasonic pulse frequency.The pulse current change rate was up to 50 A per microsecond.The power source was suited for welding not only sheet metal,but also medium and thick metal ... |
| |
| Keywords: | ultrasonic frequency pulse tungsten inert gas welding grain refinement |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《北京航空航天大学学报》浏览原始摘要信息 |
|
点击此处可从《北京航空航天大学学报》下载全文 |
|
