Ti-6Al-4V合金氢致塑性效应与应用

利用光学显微镜研究了置氢处理后Ti-6A1-4V合金的微观组织,通过X射线衍射分析试验研究了置氢处理过程中的相转变过程；采用室温压缩试验研究了置氢处理后Ti-6Al-4V合金的变形行为,并进行了冷镦试验.结果表明,氢促进了α"马氏体与亚稳β相的形成,亚稳β相的形成与转变是Ti-6Al-4V合金变形性能提高的主要因素；在...

Plastic Effect of Hydrogenated Ti-6Al-4V Alloy and Its Application

The microstructure of hydrogenated Ti-6Al-4V alloy is studied by an optical microscope, and its phase transformations are analyzed during the hydrogenating treatment by X-ray diffraction(XRD). The deformation behavior of the hydrogenated Ti-6Al-4V alloy is investigated through compression tests at room temperature, and jumptests are performed, too. The results show that the presence of hydrogen in the alloy promotes the formation of martensite α″ and metastable phase β, and the formation and transition of metastable phase β is the major factor for the improvement of processability of Ti-6Al-4V alloy. Compared with the as-received alloy, the peak stress of hydrogenated Ti-6Al-4V with 0.60% H to 0.90% H decreases by 60 MPa and its compression limit improves by over 40%. When the hydrogen content reaches 0.80%, 90°sunk screws of diameter φ 10 mm can be prepared from Ti-6Al-4V by alloy jumptests at room temperature.