| 某型发动机滑油通风节流嘴流量-阻力特性试验研究 |
| |
| 引用本文： | 田文正,李国权,杜红军,邢俊.某型发动机滑油通风节流嘴流量-阻力特性试验研究[J].航空发动机,2010,36(5):56-58,20. |
| |
| 作者姓名： | 田文正 李国权 杜红军 邢俊 |
| |
| 作者单位： | [1]沈阳发动机设计研究所,沈阳110015 [2]中国人民解放军65181部队,沈阳112611 |
| |
| 摘 要： | 某型发动机后轴承腔采用了节流通风设计,通风腔节流嘴的阻力特性是发动机验证机试车选择首装节流嘴及后续调试的重要依据。对该型发动机可能使用的8种尺寸的节流嘴进行了阻力-流量特性试验,试验中模拟了发动机轴承腔中的油气混合流体介质。同时根据空气动力学原理,给出了估算发动机节流嘴壅塞状态下质量流量和体积流量的公式,并据此给出了在工程计算中初步估算所需节流嘴通径的方法。
|
| 关 键 词： | 航空发动机 润滑系统 节流通风 节流嘴 壅塞 |
Experimental Study of Choke Flow-drag Characteristics for an Aeroengine Lubrication Throttling Vent System |
| |
| Authors: | TIAN Wen-zheng LI Guo-quan DU Hong-jun XING Jun |
| |
| Institution: | 1.Shenyang Aeroengine Research Institute,Shenyang 110015,China;2.No.65181 of PLA,Shenyang 112611,China) |
| |
| Abstract: | The throttling vent design was adopted in back bearing bore of anaeroengine.The choke drag characteristics were an important basis of choosing the first appropriate choke before aeroengine validation test and subsequentaeroengine debugging.The drag-flow characteristics experiment was conducted on eight kinds of different diameter chokes for probably used in the aeroengine.The oil and gas mixed flow of the bearing bore was simulated in the experiment.On the base of aerodynamics,the formulas of computing mass flow rate and volumetric flow rate were obtained,which were used in the condition of estimating chokeout,and then the method to preliminarily estimate the appropriate choke diameter in the engineering calculation was given. |
| |
| Keywords: | aeroengine lubrication system throttling vent system choke chokeout |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《航空发动机》浏览原始摘要信息 |
| 点击此处可从《航空发动机》下载免费的PDF全文 |
|
