|
|||||
|
|
| 固体火箭发动机柔性接头的结构分析 | |
| 引用本文： | 曹翠微,陈伟民,蔡体敏,李敏.固体火箭发动机柔性接头的结构分析[J].推进技术,2006,27(5):450-454. |
| 作者姓名： | 曹翠微 陈伟民 蔡体敏 李敏 |
| 作者单位： | 1. 西北工业大学,航天学院,陕西,西安,710072;二炮驻西安地区专装军代室,陕西,西安,710072 2. 中国科学院,力学研究所,北京,100080 3. 西北工业大学,航天学院,陕西,西安,710072 4. 北京航空航天大学,航空科学与工程学院,北京,100083 |
| 摘 要： | 为了进行固体火箭发动机柔性接头结构分析，建立了三维超弹结构有限元模型，用单轴拉伸与简单剪切橡胶材料试验数据，采用三阶橡胶本构模型，载荷跟随变形的方式处理驱动载荷方向的变化，给出了典型载荷状态下的计算结果。获得了柔性接头应力应变分布，随着容压增大，弹性件径向拉应力的区域迅速减少，获得相同转角的驱动载荷将会减小，该现象与试验结果吻合较好。 |
| 关 键 词： | 超弹性 弹性体 力学性能 有限元法 固体推进剂火箭发动机 |
| 文章编号： | 1001-4055（2006）05-0450-05 |
| 收稿时间： | 2005-12-12 |
| 修稿时间： | 2006-02-27 |
Structural analysis on solid rocket motor flexible joint |
|
| CAO Cui-wei,CHEN Wei-min,CAI Ti-min and LI Min.Structural analysis on solid rocket motor flexible joint[J].Journal of Propulsion Technology,2006,27(5):450-454. | |
| Authors: | CAO Cui-wei CHEN Wei-min CAI Ti-min and LI Min |
| Abstract: | The 3D hyperelastic finite element model of the solid rocket motor flexible joint was set up to analyze structural characters, The experimental data of axial-tension and simple shear test were fitted to achieve the hyperelastie behavior parameters. The 3rd order deformation rubber stress-strain model was adopted and the load direction changed with the deformation was taken into account. The calculated results under the condition of typical loads and the stress and strain distributions of the flexible joint were obtained. The domain and amplitude of radial tension stress and the load achieving same angle of rotation decrease with enhancing pressure. The results agreed with the data of experiments well. |
| Keywords: | Hyperelastic Elastomer Mechanical performance Finite element Solid propellant rocket engine |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |
| 点击此处可从《推进技术》浏览原始摘要信息 | |
| 点击此处可从《推进技术》下载免费的PDF全文 | |