| 基于径向基函数响应面的机翼有限元模型修正 |
| |
| 引用本文： | 秦玉灵,孔宪仁,罗文波.基于径向基函数响应面的机翼有限元模型修正[J].北京航空航天大学学报,2011,37(11):1465-1470. |
| |
| 作者姓名： | 秦玉灵 孔宪仁 罗文波 |
| |
| 作者单位： | 哈尔滨工业大学卫星技术研究所,哈尔滨,150001;中国空间技术研究院,北京,100086 |
| |
| 基金项目： | 长江学者创新团队发展计划资助项目(IRT0520) |
| |
| 摘 要： | 用ANSYS三维实体单元SOLID45建立机翼基准有限元模型并计算其自由振动的前6阶模态频率.用均匀设计方法将结构参数分组并分别计算各组结构参数对应的模态频率,建立高斯径向基函数响应面模型.用最小二乘法则拟合系数并检验响应面拟合精度,对基准模型的结构参数施加摄动量建立待修正有限元模型.用响应面模型和基准模型计算所得模态频率的相对误差建立适应度函数的表达式,将混沌搜索机制引入粒子群算法对结构参数的摄动量进行寻优计算,搜索所得优化解代入即得修正后模型,将修正后模型与基准模型在测试频段内段外的模态频率近似度进行比较,证实了修正后模型的有效性.
|
| 关 键 词： | 机翼 均匀设计 高斯径向基函数响应面 混沌搜索机制 粒子群算法 |
| 收稿时间： | 2010-07-14 |
Finite element model updating of airplane wing based on Gaussian radial basis function response surface |
| |
| Qin Yuling Kong Xianren Luo Wenbo.Finite element model updating of airplane wing based on Gaussian radial basis function response surface[J].Journal of Beijing University of Aeronautics and Astronautics,2011,37(11):1465-1470. |
| |
| Authors: | Qin Yuling Kong Xianren Luo Wenbo |
| |
| Institution: | 1. Research Center of Satellite Technology, Harbin Institute of Technology, Harbin 150001, China;
2. China Academy of Space Technology, Beijing 100086, China |
| |
| Abstract: | The benchmark finite element model(FEM) of the airplane wing was constituted using the three-dimensional solid element SOLID45 in ANSYS,and the uniform design method was employed to group the structure parameters to calculate the corresponding modal frequencies of each set of parameters,then the Gaussian radial basis function(RBF) response surface was constituted,the coefficients of which were fitted by the least square method(LSM),and the fitting precision was evaluated.The non-updated FEM was obtained by ... |
| |
| Keywords: | airplane wing uniform design Gaussian radial basis function(RBF) response surface chaos-search mechanism particle swarm optimization(PSO) algorithm |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《北京航空航天大学学报》浏览原始摘要信息 |
| 点击此处可从《北京航空航天大学学报》下载免费的PDF全文 |
