首页 | 本学科首页   官方微博 | 高级检索  
     检索      

2D C/SiC 复合材料的静压痕力的损伤表征
引用本文:徐红瑞,成来飞,梅辉.2D C/SiC 复合材料的静压痕力的损伤表征[J].航空学报,2012,33(8):1547-1553.
作者姓名:徐红瑞  成来飞  梅辉
作者单位:西北工业大学 材料学院, 陕西 西安 710072
基金项目:国家自然科学基金青年项目,西北工业大学基础研究基金
摘    要:为考察2D C/SiC 复合材料在外力作用下产生的不可见损伤对其力学性能的影响。通过静压痕实验引入损伤,采用红外热波成像和残余性能测试的方法,表征2D C/SiC 复合材料的损伤。结果表明:施加能量为0.75 J时,复合材料内部开始产生损伤, 施加能量为1.8 J(接触力1 700 N、压痕深1 mm)时,损伤模式发生转变;随着损伤程度的加重,残余压缩强度下降率约为残余拉伸强度下降率的2倍。

关 键 词:静压痕  施加能量  压痕  损伤阻抗  损伤容限  
收稿时间:2011-10-11;
修稿时间:2011-11-08

The Characterization of Indentation of 2D C/SiC Composites Subjected to Quasi-static Indentation
XU Hongrui , CHENG Laifei , MEI Hui.The Characterization of Indentation of 2D C/SiC Composites Subjected to Quasi-static Indentation[J].Acta Aeronautica et Astronautica Sinica,2012,33(8):1547-1553.
Authors:XU Hongrui  CHENG Laifei  MEI Hui
Institution:School of Materials Science and Engineering, Northwestern Polytechnical University, Xi’an 710072, China
Abstract:In order to examine the mechanical properties of 2D C/SiC composites with invisible damages induced by external forces,this paper employed thermal imaging testing and residual strength testing to characterize the damage of 2D C/SiC composites induced by quasi-static indentation(QSI).The results indicated that when the energy applied reached 0.75 J,damage started to occur inside the composites;above 1.8 J(the contact force was above 1 700 N,and the depth reached 1 mm),the damage mode transformed.With the aggravation of the damage,the decreasing rate of residual compressive strength was nearly 2 times higher than that of the residual tensile strength.
Keywords:quasi-static indentation  loaded energy  indentation  damage resistance  damage tolerance
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《航空学报》浏览原始摘要信息
点击此处可从《航空学报》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号