首页 | 本学科首页   官方微博 | 高级检索  
     检索      

二股流喷射控制推力矢量数值计算研究
引用本文:刘刚,杨永,李聪.二股流喷射控制推力矢量数值计算研究[J].航空计算技术,2005,35(2):50-53.
作者姓名:刘刚  杨永  李聪
作者单位:西北工业大学,航空学院,陕西,西安,710072;中国航空工业气动力研究院,黑龙江,哈尔滨,150001
摘    要:利用求解雷诺平均的N-S方程的数值模拟方法,对一种新型的推力矢量喷管———基于次流喷射控制的二维收缩-扩张喷管(2DCD)———的推力矢量性能进行了研究。根据数值模拟结果分析了外流马赫数、喷管压强比和次流总压与主流总压之比对矢量偏角的影响。

关 键 词:二维收缩-扩张喷管  N-S方程  射流推力矢量
文章编号:1671-654X(2005)02-0050-04
修稿时间:2005年3月7日

Computational Study of Fluidic Thrust Vectoring
LIU Gang,YANG Yong,LI Cong.Computational Study of Fluidic Thrust Vectoring[J].Aeronautical Computer Technique,2005,35(2):50-53.
Authors:LIU Gang  YANG Yong  LI Cong
Institution:LIU Gang~1,YANG Yong~1,LI Cong~2
Abstract:The new type of two-dimensional, convergent-divergent(2DCD) nozzle with fluidic injection for pitching vector control was analyzed by the computation of Reynolds averaging N-S equations. It is advanced in time with an implicit approximate-factorization method to obtain the steady solutions of the N-S equations. The computational results show that the vectoring angle is dependent on the freestream Mach number, nozzle pressure ratio(NPR) and secondary pressure ratio(SPR). If the other conditions kept the same and only the freestream Mach number increased, we can see that with the increasing freestream Mach number the vectoring angle will be decreased. The vectoring angle decreases while the nozzle pressure ratio increases. The vectoring angle decreases about 5.5 degrees when the secondary pressure ratio increases from 0.6 to 1.0.
Keywords:two-dimensional convergent-divergent nozzle  N-S equations  fluidic vectoring thrust
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号