| 各向异性屈服准则对铝合金板深冲起皱预测的影响 |
| |
| 引用本文： | 汤井伦,江五贵,黎军顽,苏建君.各向异性屈服准则对铝合金板深冲起皱预测的影响[J].南昌航空工业学院学报,2006,20(4):59-63. |
| |
| 作者姓名： | 汤井伦 江五贵 黎军顽 苏建君 |
| |
| 作者单位： | 南昌航空工业学院,江西,南昌,330063;南昌航空工业学院,江西,南昌,330063;南昌航空工业学院,江西,南昌,330063;南昌航空工业学院,江西,南昌,330063 |
| |
| 摘 要： | 基于板料成形深冲过程的数值模拟,研究了不同的各向异性屈服准则(Hill1948,Barlat YLD91和CMTP)对铝合金板深冲成形过程起皱预测的影响,并对模拟结果进行了比较,结果表明:采用不同屈服准则模拟的应力和应变分布有所不同,采用CMTP和Balart YLD91屈服准则比Hill1948屈服准则预测的要高。
|
| 关 键 词： | 深冲 各向异性 屈服准则 有限元 |
| 文章编号： | 1001-4926(2006)03-0059-05 |
| 修稿时间： | 2006年11月1日 |
Effects of anisotropic yield criteria on the prediction of wrinkle during the deep-drawing forming of aluminum alloy sheet |
| |
| TANG Jing-lun,JIANG Wu-gui,LI Jun-wan,SU Jian-jun.Effects of anisotropic yield criteria on the prediction of wrinkle during the deep-drawing forming of aluminum alloy sheet[J].Journal of Nanchang Institute of Aeronautical Technology(Natural Science Edition),2006,20(4):59-63. |
| |
| Authors: | TANG Jing-lun JIANG Wu-gui LI Jun-wan SU Jian-jun |
| |
| Abstract: | The effects of different anisotropic yield criteria(Hill1948,Barlat YLD91 and CMTP) on the deep drawing simulation of a circular blank sheet based on FEM were studied,and the numerical solution of different yield functions was compared with each other.The results show that stress distribution is different by using these three yield criteria,the wrinkle is higher for Barlat's YLD91 and CMTP's than for Hill's(1948). |
| |
| Keywords: | deep drawing anisotropy yield criteria finite element |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
