首页 | 本学科首页   官方微博 | 高级检索  
     

基于自适应迭代的机器人曲面恒力跟踪
引用本文:李琳,肖佳栋,张铁,肖蒙. 基于自适应迭代的机器人曲面恒力跟踪[J]. 北京航空航天大学学报, 2019, 45(4): 641-649. DOI: 10.13700/j.bh.1001-5965.2018.0441
作者姓名:李琳  肖佳栋  张铁  肖蒙
作者单位:华南理工大学 机械与汽车工程学院,广州,510640;华南理工大学 机械与汽车工程学院,广州,510640;华南理工大学 机械与汽车工程学院,广州,510640;华南理工大学 机械与汽车工程学院,广州,510640
基金项目:国家科技重大专项(2015ZX04005006);广东省重大科技专项(2014B090921004,2014B090920002);中山市重大科技专项(2016F2FC0006)
摘    要:针对利用机器人进行打磨、抛光、去毛刺等场合时末端执行器对曲面工件轮廓跟踪时难以得到恒定接触力的问题,对机器人末端执行器和工件轮廓接触时的接触力进行研究,建立了实际跟踪过程中机器人末端执行器的接触力和已知传感器坐标系的映射关系,提出了一种基于自适应迭代学习算法的机器人力/位混合曲面恒力跟踪控制方法。该方法由两部分组成:基于机器人和环境接触时的阻抗模型设计了迭代学习控制律,在PD反馈控制的基础上通过迭代项克服机器人的未知参数和不确定性,并构建Lyapunov能量函数证明所提控制律的收敛性;将迭代学习控制律和力/位混合曲面恒力跟踪控制方法结合起来设计了用于曲面工件轮廓跟踪的控制方法。实验结果显示,经过15次迭代,接触力的波动范围逐渐变小并稳定在±3 N之内,验证了所提方法的有效性。 

关 键 词:机器人  曲面跟踪  恒力控制  力/位混合控制  自适应迭代学习
收稿时间:2018-07-23

Constant-force curved-surface-tracking with robotic manipulator based on adaptive iterative algorithm
LI Lin,XIAO Jiadong,ZHANG Tie,XIAO Meng. Constant-force curved-surface-tracking with robotic manipulator based on adaptive iterative algorithm[J]. Journal of Beijing University of Aeronautics and Astronautics, 2019, 45(4): 641-649. DOI: 10.13700/j.bh.1001-5965.2018.0441
Authors:LI Lin  XIAO Jiadong  ZHANG Tie  XIAO Meng
Affiliation:School of Mechanical & Automotive Engineering, South China University of Technology, Guangzhou 510640, China
Abstract:This paper dealt with the fluctuation and instability of contact force that isgenerated between robot end-effector and environment during the process of robotic grinding, polishing and deburring. In order to obtain constant tracking force, the contact force is generated by robot end-effector onto the workpiece surface is analyzed and the mapping relationship between the contact force of robot end-effector in real contact conditions and the known sensor coordinate system was built. Meanwhile, a hybrid force/position control scheme based on adaptive iterative learning algorithm was proposed to compensate the robot end-effector trajectory offset. The control method is composed with two steps. An iterative learning control law was designed based on the impe-dance model of robot-environment in dynamic interaction task. This control law coped with the unknown parameters and disturbances by adding the iterative term to the PD feedback structure. Meanwhile, a Lyapunov energy function was designed to prove the convergence of the control law. The adaptive iterative learning control law was then combined with the force/position hybrid control method to design the constant-force curved-surface-tracking control scheme with robotic manipulator. The experimental results show that after 15 times iteration, the fluctuating range of contact force becomes small gradually and is within ±3 N, which illustrates the effectiveness of the designed control scheme.
Keywords:robot  curved-surface-tracking  constant-force control  hybrid force/position control  adaptive iterative learning
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《北京航空航天大学学报》浏览原始摘要信息
点击此处可从《北京航空航天大学学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号