首页 | 本学科首页   官方微博 | 高级检索  
     检索      

Gao-Yong模型用于吹气环量控制翼型的研究
引用本文:李志强,杜曼丽.Gao-Yong模型用于吹气环量控制翼型的研究[J].航空动力学报,2009,24(6):1326-1331.
作者姓名:李志强  杜曼丽
作者单位:北京航空航天大学 能源与动力工程学院, 航空发动机气动热力重点实验室, 北京 100191
摘    要:应用Gao-Yong湍流模型模拟了吹气对翼型表面分离流控制的影响.结果表明,该模型不仅能够对翼型绕流的分离点、表面压力分布、升阻特性等做出较好预测,而且还能模拟出控制分离的吹气效果:①有效消除翼面分离涡;②"裹携"翼面来流进一步提高升力系数.提高吹气动量系数,升力曲线上移的幅度也相应增加;而吹气角度对吹气射流"裹携"作用的强弱也有一定的影响,当吹气方向相对于翼弦偏上时,吹气射流"裹携"来流与消除分离涡的作用增强,升力提升更为明显. 

关 键 词:环量控制翼型    Gao-Yong湍流模型    尾缘吹气    升力
收稿时间:2008/6/23 0:00:00
修稿时间:3/3/2009 12:00:00 AM

Study of circulation control airfoil with blowing jet using Gao-Yong turbulence model
LI Zhi-qiang and DU Man-li.Study of circulation control airfoil with blowing jet using Gao-Yong turbulence model[J].Journal of Aerospace Power,2009,24(6):1326-1331.
Authors:LI Zhi-qiang and DU Man-li
Institution:National Key Laboratory on Aero-Engines, School of Jet Propulsion, Beijing University of Aeronautics and Astronautics, Beijing 100191, China
Abstract:Gao-Yong turbulence model was applied to simulate the influence of blowing jet on the flow separation control of the airfoil surface.The results show that Gao-Yong turbulence model can not only successfully simulate the location of separation and the aerodynamic force coefficients,but also effectively simulate the blowing effect of flow separation control.Other than increasing lift by inhibiting flow separation vortex on the airfoil surface,the blowing jet can also induce much higher lift through the "packa...
Keywords:circulation control airfoil  Gao-Yong turbulence model  blowing  lift  
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《航空动力学报》浏览原始摘要信息
点击此处可从《航空动力学报》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号