| 磨牙修复体数控加工刀轨生成算法的实现 |
| |
| 引用本文： | 王奇峰,孙全平,戴宁,廖文和.磨牙修复体数控加工刀轨生成算法的实现[J].南京航空航天大学学报(英文版),2007,24(4):323-328. |
| |
| 作者姓名： | 王奇峰 孙全平 戴宁 廖文和 |
| |
| 作者单位： | 1. 南京航空航天大学机电学院,南京,210016,中国
2. 南京航空航天大学机电学院,南京,210016,中国;淮阴工学院数学化制造技术实验室,淮安,223001,中国 |
| |
| 基金项目： | 江苏省自然科学基金
,
江苏省高校自然科学基础研究计划 |
| |
| 摘 要： | 磨牙修复体CAD模型通常以STL格式存储.本文给出了基于STL格式新的拓扑结构,提出了基于顶点的实体等距算法,实现了磨牙修复体粗/精加工刀轨的快速生成.仿真加工结果表明,本文所提算法稳定性好,计算速度快,加工精度高.
|
| 关 键 词： | 磨牙修复体 数控编程 刀具轨迹 mlar prosthesis numerical control programming tool path 牙修复体 数控加工 刀轨 生成算法 PROSTHESIS MOLAR NC MACHINING fast calculation speed high machining accuracy Simulation results show characteristics stabilization finishing tool path topological structure |
| 文章编号： | 1005-1120（2007）04-0323-06 |
| 收稿时间： | 2005-11-07 |
| 修稿时间： | 2006-09-21 |
RITHM OF TOOL PATH GENERATION FOR NC MACHINING OF MOLAR PROSTHESIS |
| |
| Wang Qifeng,Sun Quanping,Dai Ning,Liao Wenhe.RITHM OF TOOL PATH GENERATION FOR NC MACHINING OF MOLAR PROSTHESIS[J].Transactions of Nanjing University of Aeronautics & Astronautics,2007,24(4):323-328. |
| |
| Authors: | Wang Qifeng Sun Quanping Dai Ning Liao Wenhe |
| |
| Abstract: | The CAD model of molar prosthesis is usually stored in Standard templete library (STL) format. A new topological structure is given based on STL format and the vertex-based entity offset algorithm is presented to realize the rapid generation of roughing/finishing tool path for molar prosthesis. Simulation results show that the proposed algorithm prossesses characteristics of excellent stabilization, fast calculation speed and high machining accuracy. |
| |
| Keywords: | mlar prosthesis numerical control programming tool path |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
