| RTM工艺成型复合材料树脂固化过程残余应变监测研究 |
| |
| 引用本文： | 秦伟,吴晓宏,曹茂盛. RTM工艺成型复合材料树脂固化过程残余应变监测研究[J]. 航空材料学报, 2005, 25(4): 50-52 |
| |
| 作者姓名： | 秦伟 吴晓宏 曹茂盛 |
| |
| 作者单位： | 哈尔滨工程大学,哈尔滨,150001;哈尔滨工业大学,哈尔滨,150001;哈尔滨工程大学,哈尔滨,150001 |
| |
| 基金项目： | 国家自然基金重点资助项目(59833110) |
| |
| 摘 要： | 提出了RTM工艺树脂固化过程残余应变布拉格光栅传感器检测新方法。通过光纤光栅波长偏移与温度和固化时间之间的关系测试,得到了树脂固化过程中残余应变的变化历程,成功实现了RTM工艺树脂固化过程中残余应变的在线监测。实验结果表明,在降温过程中,残余应变的变化与温度的变化呈线性关系,这为复合材料层合板的残余应力分析提供了实验依据。
|
| 关 键 词： | RTM 布拉格光栅 环氧树脂 固化 |
| 文章编号： | 1005-5053(2005)04-0050-03 |
| 修稿时间： | 2004-10-28 |
Monitoring for Residual Strain of Resin Cure During the Process of RTM Composites |
| |
| QIN Wei,WU Xiao-hong,CAO Mao-sheng. Monitoring for Residual Strain of Resin Cure During the Process of RTM Composites[J]. Journal of Aeronautical Materials, 2005, 25(4): 50-52 |
| |
| Authors: | QIN Wei WU Xiao-hong CAO Mao-sheng |
| |
| Abstract: | The monitoring system of fiber Bragg grating for the RTM curing process was established. The real time monitoring for residual strain induced by resin cure during the RTM process was realized by measuring the relationship among wave deflection,temperature and curing time. The result shows that the relationship between the residual strain and the temperature change is approximately linear during the process of cooling, which supplies experimental support for the residual stress analysis of composite plate. |
| |
| Keywords: | RTM Bragg grating epoxy resin cure |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
