| 高超声速飞行器TPS破损修复涂料 |
| |
| 引用本文： | 李阳,汪涛.高超声速飞行器TPS破损修复涂料[J].宇航材料工艺,2011,41(4):32-35. |
| |
| 作者姓名： | 李阳 汪涛 |
| |
| 作者单位： | 南京航空航天大学材料科学与技术学院,南京,211106 |
| |
| 摘 要： | 分别采用环氧树脂和呋喃树脂作为基体混合碳化硅粉末与晶须制备了耐高温修复涂料.以氧-乙炔烧蚀试验测试涂料的耐高温烧蚀性能,用扫描电子显微镜分析烧蚀后涂料表面的微观形貌,用X射线衍射、表面能谱分析对涂料烧蚀后成分进行分析表征.结果表明:碳化硅粉末与晶须的质量分数比为8/4的呋喃树脂/碳化硅体系涂料具有良好的耐高温烧蚀性能,...
|
| 关 键 词： | 呋喃树脂 环氧树脂 碳化硅 修复涂料 高超声速飞行器 TPS |
Repair Coating for TPS of Hypersonic Vehicles |
| |
| Li Yang,Wang Tao.Repair Coating for TPS of Hypersonic Vehicles[J].Aerospace Materials & Technology,2011,41(4):32-35. |
| |
| Authors: | Li Yang Wang Tao |
| |
| Institution: | Li Yang Wang Tao(School of Material Science and Technology,Nanjing University of Aeronautics and Astronautics,Nanjing 211106) |
| |
| Abstract: | The high temperature resistant repair coating was prepared by using epoxy resin and furan resin as matrix respectively,which was mixed with SiC powder and whisker.The ablative resistance property was investigated by using oxyacetylene ablation equipment.The materials and microstructures of the ablated samples were characterized by X-ray diffraction,energy dispersive spectroscopy and scanning electron microscopy.It is found that the furan resin/SiC coating with the mass ratio of SiC powder and whisker is 8/4... |
| |
| Keywords: | Furan resin Epoxy resin SiC Repair coating Hypersonic vehicle TPS |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《宇航材料工艺》浏览原始摘要信息 |
| 点击此处可从《宇航材料工艺》下载免费的PDF全文 |
