| 前级环形切割器对后端靶板影响的数值仿真 |
| |
| 引用本文： | 宋之勇,王伟力,李永胜,白连建,傅磊.前级环形切割器对后端靶板影响的数值仿真[J].海军航空工程学院学报,2012,27(6):684-688. |
| |
| 作者姓名： | 宋之勇 王伟力 李永胜 白连建 傅磊 |
| |
| 作者单位： | 海军航空工程学院研究生管理大队;海军航空工程学院兵器科学与技术系;92514部队 |
| |
| 摘 要： | 利用ANSYS／LS—DYNA软件进行了环形切割器爆炸后对后端靶板的毁伤及环形切割器壳体的破裂过程的数值仿真。仿真结果表明：环形切割器爆炸后对后端靶板的毁伤中，起主璎作用的是环形切割器壳体的端部形成的破片和内侧形成的聚能侵彻体，而聚能侵彻体对靶板的破坏最为严重；琏于环形切割器的串联战斗部设计中，需考虑两级战斗部隔爆设计。
|
| 关 键 词： | 环形切割器 串联战斗部 ANSYS LS—DYNA 后端靶板 数值模拟 |
Numerical Simulation on the Effect of Annular Cutter to Following Target |
| |
| SONG Zhi-yong,WANG Wei-li,LI Yong-sheng,BAI Lian-jian and FU Lei.Numerical Simulation on the Effect of Annular Cutter to Following Target[J].Journal of Naval Aeronautical Engineering Institute,2012,27(6):684-688. |
| |
| Authors: | SONG Zhi-yong WANG Wei-li LI Yong-sheng BAI Lian-jian and FU Lei |
| |
| Institution: | 1a(1.Naval Aeronautical and Astronautical University a.Graduate Students’ Brigade,b.Department of Ordnance Science and Technology;2.The 92514thUnit of PLA,Yantai Shandong 264001,China) |
| |
| Abstract: | The annular cutter damaged following target and its shell breaking, when the explosive was detonated, which was simulated by using ANSYS/LS-DYNA software. The simulation results showed that the fragments produced by the end part of annular cutter shell and the shaped charge projectile produced by inside part of annular cutter shell had the major seriously damage to the following target, the shaped projectile had the must seriously damage to the target, the design of tandem warhead based on annular cutter needed making allowance for the blast-proof between the two warheads. |
| |
| Keywords: | annular cutter tandem warhead ANSYS/LS-DYNA back-end target plate numerical simulation |
| 本文献已被 CNKI 维普 等数据库收录！ |
| 点击此处可从《海军航空工程学院学报》浏览原始摘要信息 |
| 点击此处可从《海军航空工程学院学报》下载免费的PDF全文 |
