| 预轧制变形对2091合金应力腐蚀敏感性的影响 |
| |
| 引用本文： | 李仁顺,陈想平.预轧制变形对2091合金应力腐蚀敏感性的影响[J].宇航学报,1994,15(4):46-51. |
| |
| 作者姓名： | 李仁顺 陈想平 |
| |
| 作者单位： | 哈尔滨工业大学 |
| |
| 摘 要： | 时效前对Ａｌ－Ｌｉ－Ｃｕ－Ｍｇ－Ｚｒ（２０９１）合金进行冷轧和温轧关系，用慢应变速率拉伸试验研究了合金在３．５％ＮａＣｌ溶液中的应力腐蚀敏感生。结果表明，预轧制变形提高了合金的应力腐蚀抗力。冷轧受形量为２０％以及温轧温度为１８０℃时，合金都具有最低的应力腐蚀敏感性。对合金应力腐蚀抗力与显微组织的关系进行了探讨。
|
| 关 键 词： | 应力腐蚀 预变形 轧制 铝锂合金 |
EFFECT OF PRE-ROLLING DEFORMATION ON STRESS CORROSION CRACKING SUSCEPTIBILITY OF (2091) ALLOY |
| |
| Li Renshun, Chen Xiangping, Wang Zuoyi.EFFECT OF PRE-ROLLING DEFORMATION ON STRESS CORROSION CRACKING SUSCEPTIBILITY OF (2091) ALLOY[J].Journal of Astronautics,1994,15(4):46-51. |
| |
| Authors: | Li Renshun Chen Xiangping Wang Zuoyi |
| |
| Institution: | Harbin Institute of technology |
| |
| Abstract: | Stress corrosion cracking(SCC) susceptibility of (2091) Al-Li alloy in 3. 5% NaCl solution was studied by slow strain rate tensile est, under cold-rolling or warmrolling reduction prior to aging. Results have shown that rolling deformation prior to aging improve SCC resistance. Under cold-rolling (20% reduction) or warm-rolling at 180C, the SCC susceptibility of the alloy is the lowest. The correlation betweem SCC resistance and microstructure of the alloy was investigated. |
| |
| Keywords: | Al-Li alloy Stress corrosion Predeformation |
| 本文献已被 CNKI 维普 等数据库收录！ |
