| 弱刚度结构件的加工变形控制技术研究 |
| |
| 引用本文： | 刘胤,胡小秋,杨芸,刘军,焦刚.弱刚度结构件的加工变形控制技术研究[J].航天制造技术,2009(1). |
| |
| 作者姓名： | 刘胤 胡小秋 杨芸 刘军 焦刚 |
| |
| 作者单位： | 航天科工惯性技术有限公司;南京理工大学机械工程学院; |
| |
| 基金项目： | “十一五”国防基础预研资助项目(编号:623010901) |
| |
| 摘 要： | 针对弱刚度结构件加工变形难以控制的问题,在对其加工难点和加工变形影响因素进行概括的基础上,提出了弱刚度结构件加工变形控制的工艺改进过程框图,从七个方面对其加工变形控制技术进行了研究。
|
| 关 键 词： | 弱刚度结构件 加工变形 控制技术 |
Study on Machining Deformation Control of Weak-rigidity Structural Parts |
| |
| Liu Yin Hu Xiaoqiu Yang Yun Lin Jun Jiao Gang.Study on Machining Deformation Control of Weak-rigidity Structural Parts[J].Aerospace Manufacturing Technology,2009(1). |
| |
| Authors: | Liu Yin Hu Xiaoqiu Yang Yun Lin Jun Jiao Gang |
| |
| Institution: | 1.Inertia Technologies Co.;Ltd.Beidou Enterprise Department;CASIC;Beijing 100074;2.School of Mechanical Engineering;Nanjing University of Science and Technology;Nanjing 210094 |
| |
| Abstract: | It is hard to control the deformation of weak-ridigity structural parts during the machining process.The machining difficulties and factors influencing the machining deformation are summarized.A process improvement diagram of deformation control of weak-ridigity structural parts is proposed and the control technology is discussed from seven aspects. |
| |
| Keywords: | weak-rigidity structural part machining deformation control technology |
| 本文献已被 CNKI 等数据库收录！ |
