首页 | 本学科首页   官方微博 | 高级检索  
     

磁场全张量测量计算方法与误差分析
引用本文:刘超波,王斌,陈金刚,代佳龙,孟立飞,肖琦. 磁场全张量测量计算方法与误差分析[J]. 航天器环境工程, 2015, 32(1): 63-66. DOI: 10.12126/see.2015.01.012
作者姓名:刘超波  王斌  陈金刚  代佳龙  孟立飞  肖琦
作者单位:1.北京卫星环境工程研究所, 北京 100094
基金项目:国家自然科学基金青年科学基金项目“基于磁场梯度张量的多磁源目标反演方法研究”(编号:51207011)
摘    要:矢量磁场和磁场全张量数据是多磁源反演的数据基础。针对矢量磁场和磁场全张量的测量问题,文章提出了矩阵式矢量磁场连续扫描方法。对利用矢量磁场计算磁场全张量所用的数据结构进行了研究,应用MATLAB软件对常用的十字形和六面体两种不同数据计算结构进行了仿真分析,结果表明,两种计算结构的误差相近且均不大于10%;并分析了基线距离对磁场全张量计算的影响,结果表明,磁场全张量计算误差随着基线距离的增加而增加。

关 键 词:磁场测量   全张量   数据计算结构   误差分析
收稿时间:2014-07-23
修稿时间:2014-08-19

Measurement and calculation of magnetic field full tensor with error analysis
Liu Chaobo,Wang Bin,Chen Jin''gang,Dai Jialong,Meng Lifei,Xiao Qi. Measurement and calculation of magnetic field full tensor with error analysis[J]. Spacecraft Environment Engineering, 2015, 32(1): 63-66. DOI: 10.12126/see.2015.01.012
Authors:Liu Chaobo  Wang Bin  Chen Jin''gang  Dai Jialong  Meng Lifei  Xiao Qi
Affiliation:1.Beijing Institute of Spacecraft Environment Engineering, Beijing 100094, China
Abstract:The data of the vector magnetic field and the magnetic full tensor are the foundation of the multi-magnetic source inversion. For the measurement of the vector magnetic field and the magnetic full tensor, a sequential scan method in the matrix mode is proposed. Two data structures, the crisscross structure and the hexahedron structure, for the computation of the magnetic full tensor through the magnetic field are used in the MATLAB simulations. It is shown that the results obtained by using the two data structures are very close with differences less than 10%. The influence of the baseline length on the results of the magnetic full tensor is analyzed, and the influence is shown to be great and it increases with the increase of the dateline length.
Keywords:magnetic field measurement  full tensor  data calculation structure  error analysis
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《航天器环境工程》浏览原始摘要信息
点击此处可从《航天器环境工程》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号