| 小孔辅助结构影响气膜冷却效果的实验 |
| |
| 引用本文： | 刘晓红,陶智,罗翔.小孔辅助结构影响气膜冷却效果的实验[J].航空动力学报,2011,26(12):2710-2715. |
| |
| 作者姓名： | 刘晓红 陶智 罗翔 |
| |
| 作者单位： | 北京航空航天大学能源与动力工程学院航空发动机气动热力国家级重点实验室,北京,100191 |
| |
| 摘 要： | 采用稳态液晶测温方法,详细研究了具有辅助小孔的分叉孔和大小孔的冷却效率分布规律,并与圆柱孔和扇形孔进行对比,分析小孔辅助结构对气膜冷却效果的影响.实验参数：主流雷诺数为2 900,吹风比为0.3～3.0,密度比为1.06.结果表明：所有工况下,小孔辅助结构均在一定程度上提高气膜冷却效果,吹风比越大,对气膜冷却效果的改善...
|
| 关 键 词： | 气膜冷却 冷却效率 液晶 辅助小孔 吹风比 |
| 收稿时间： | 2011/1/11 0:00:00 |
| 修稿时间： | 3/4/2011 12:00:00 AM |
Experimental investigation on effect of small auxiliary holes on film cooling effectiveness |
| |
| LIU Xiao-hong,TAO Zhi and LUO Xiang.Experimental investigation on effect of small auxiliary holes on film cooling effectiveness[J].Journal of Aerospace Power,2011,26(12):2710-2715. |
| |
| Authors: | LIU Xiao-hong TAO Zhi and LUO Xiang |
| |
| Institution: | National Key Laboratory of Science and Technology on Aero-Engine Aero-thermodynamics, School of Jet Propulsion, Beijing University of Aeronautics and Astronautics, Beijing 100191, China;National Key Laboratory of Science and Technology on Aero-Engine Aero-thermodynamics, School of Jet Propulsion, Beijing University of Aeronautics and Astronautics, Beijing 100191, China;National Key Laboratory of Science and Technology on Aero-Engine Aero-thermodynamics, School of Jet Propulsion, Beijing University of Aeronautics and Astronautics, Beijing 100191, China |
| |
| Abstract: | Experimental study was conducted to investigate the effect of small auxiliary holes on the film cooling performance.The steady-state thermochromic liquid crystal (TLC) method was used to obtain the adiabatic effectiveness distributions on the flat surface.Measurements of adiabatic effectiveness were presented for cylindrical hole,fan-shaped hole,furcated hole and parallel hole with main flow Reynolds number at 2900,blowing ratio ranging from 0.3 to 3.0 and density ratio at 1.06.Results show that the film coverage and adiabatic effectiveness downstream of furcated hole and parallel hole are evidently superior to those of cylindrical hole at blowing ratios range from 0.3 to 3.0.While fan-shaped hole increases the adiabatic effectiveness compared with cylindrical hole only in cases of blowing ratios greater than 1.0.A higher blowing ratio means more obvious improvement of the adiabatic effectiveness. |
| |
| Keywords: | film cooling adiabatic effectiveness liquid crystal small auxiliary hole blowing ratio |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《航空动力学报》浏览原始摘要信息 |
| 点击此处可从《航空动力学报》下载免费的PDF全文 |
|
