Time-frequency method for detecting an accelerating target in sea clutter

The authors design a time-frequency (TF) method for use in high-frequency surface-wave radar (HFSWR) for detecting a small accelerating target in sea clutter. The clutter is modelled by pseudo targets moving with Bragg velocity towards and away from the radar. The design is based on the Wigner distribution (WD) defined by Chan (type-III WD, in our terminology) rather than the WD defined by Claasen and Mecklenbrauker (1980) (2times type-I WD, in our terminology). Like the type-I WD, the type-III WD also concentrates a chirp signal onto a straight line in the TF plane. The type-III WD has the following advantages: 1) Its range of unambiguously measurable frequencies (RUMF) is -pi,pi] rad/s, whereas for the type-I WD the RUMF is -pi/2,pi/2] rad/s. 2) It allows a target separated from the clutter by pi rad/s to be detected, whereas the type-I WD coalesces such a target with the clutter and thereby mask it. An ambiguity function (AF) was defined corresponding to the type-III WD and use it to derive a smoothed type-III WD that mitigates the clutter. The smoothed type-III WD method is applied to real radar data and shown to be superior to the conventional Fourier transform method. The advantages of the type-III WD over the type-I WD are also demonstrated. The design principles laid out in the paper can also be used to develop a TF method for use in air traffic control radar (ATCR) for detecting an accelerating target in land clutter