| 三床机载制氧系统性能仿真及影响因素分析 |
| |
| 引用本文： | 王慧丹,林贵平,王亮,方玲. 三床机载制氧系统性能仿真及影响因素分析[J]. 北京航空航天大学学报, 2011, 37(6): 717-722,732 |
| |
| 作者姓名： | 王慧丹 林贵平 王亮 方玲 |
| |
| 作者单位： | 1.北京航空航天大学 航空科学与工程学院, 北京 100191 |
| |
| 摘 要： | 建立了三床机载分子筛制氧系统的数学模型,对系统性能进行仿真.仿真结果与实验值进行了对比,两者吻合较好,验证了模型和求解的正确性.在此基础上,对不同飞行高度和工作条件下系统的性能进行仿真预测,研究了产品气流量、吸附压力、冲洗定径孔大小和循环时间对系统工作性能的影响,为三床机载分子筛制氧系统的设计和优化提供了依据.
|
| 关 键 词： | 空气分离 机载制氧系统 变压吸附 |
| 收稿时间： | 2011-01-07 |
Simulation on performance and effects of parameters analysis on three-bed OBOGS |
| |
| Wang Huidan,Lin Guiping,Wang Liang,Fang Ling. Simulation on performance and effects of parameters analysis on three-bed OBOGS[J]. Journal of Beijing University of Aeronautics and Astronautics, 2011, 37(6): 717-722,732 |
| |
| Authors: | Wang Huidan Lin Guiping Wang Liang Fang Ling |
| |
| Affiliation: | 1.School of Aeronautic Science and Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100191, China2. AVIC HeiFei Jianghang Aircraft Equipment Corporation LTD, Hefei 230051, China |
| |
| Abstract: | A set of mathematical models was built and utilized to simulate the performance of three-bed on-board oxygen generation system(OBOGS).Then the results of simulation were compared with the data from experiments and the good agreements were obtained to validate the models and simulation process.Based on the validated simulation,the performance of the OBOGS at different flight altitudes and in different operation conditions were predicted by simulation,and effects of some design and operation parameters such a... |
| |
| Keywords: | air separation on-board oxygen generation system(OBOGS) pressure swing adsorption |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《北京航空航天大学学报》浏览原始摘要信息 |
|
点击此处可从《北京航空航天大学学报》下载全文 |
|
