| 基于半光程差的天线反射面型面精度检测 |
| |
| 引用本文： | 周国锋,李晓星.基于半光程差的天线反射面型面精度检测[J].北京航空航天大学学报,2011,37(6):723-727. |
| |
| 作者姓名： | 周国锋 李晓星 |
| |
| 作者单位： | 北京航空航天大学 机械工程及自动化学院, 北京 100191 |
| |
| 基金项目： | 北航D2025紧缩场研制项目 |
| |
| 摘 要： | 型面拟合最小量的选取是天线面板型面检测中的关键技术之一.天线表面各点半光程差的均方根是衡量天线型面精度的指标.根据圆锥曲面的几何定义及其光学性质,提出了圆锥曲面天线面板半光程差的直接计算方法,给出了基于半光程差的非线性最小二乘曲面拟合算法.以旋转抛物面天线面板为例,通过模拟和实际测量,对比分析了分别选取轴向误差和半光程差作为最小量拟合计算结果.试验验证了选取半光程差作为最小量拟合的算法具有更高的数值计算精度及稳定性.
|
| 关 键 词： | 半光程差 圆锥曲面拟合 非线性最小二乘 反射面型面检测 |
| 收稿时间： | 2010-07-08 |
Base on semi-optical path difference of antenna reflector surface accuracy detection |
| |
| Zhou Guofeng,Li Xiaoxing.Base on semi-optical path difference of antenna reflector surface accuracy detection[J].Journal of Beijing University of Aeronautics and Astronautics,2011,37(6):723-727. |
| |
| Authors: | Zhou Guofeng Li Xiaoxing |
| |
| Institution: | School of Mechanical Engineering and Automation, Beijing University of Aeronautics and Astronautics, Beijing 100191, China |
| |
| Abstract: | The selection of minimum value of surface fitting is one of the key technologies refer to the antenna panel surface detection.The antenna surface root-mean-square of semi-optical path difference is an index of antenna surface accuracy.A direct calculation method of semi-optical path difference(OPD) was presented according to the geometric definition of conic surface and its optical properties.The nonlinear least squares curve fitting algorithm based on the semi-optical path difference was described.Employin... |
| |
| Keywords: | semi-optical path difference conic surface fitting nonlinear least squares antenna surface detection |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《北京航空航天大学学报》浏览原始摘要信息 |
| 点击此处可从《北京航空航天大学学报》下载免费的PDF全文 |
