| 10kV太空电子枪的光学系统设计及仿真研究 |
| |
| 引用本文： | 陈鹤,董全林,邵静怡,刘洋洋,王军伟,裴一飞.10kV太空电子枪的光学系统设计及仿真研究[J].航天器环境工程,2021,38(2):148-152. |
| |
| 作者姓名： | 陈鹤 董全林 邵静怡 刘洋洋 王军伟 裴一飞 |
| |
| 作者单位： | 北京航空航天大学 仪器科学与光电工程学院,北京 100191;北京卫星环境工程研究所,北京 100094 |
| |
| 基金项目： | 北京卫星环境工程研究所创新基金项目（编号:CAST-BISEE 2019-040） |
| |
| 摘 要： | 为使电子枪的性能满足太空环境下的作业要求,对10 kV太空电子枪的光学系统进行设计与仿真研究,给出一套完整的设计方法及流程.首先选择合适的阴极材料,仿真得到电子束的轨迹;而后算出合适的焦距,对一级聚焦电子光学系统进行仿真.鉴于一级聚焦系统不能实现在工作距离为300 mm时束斑直径为0.4 mm的设计目标,进而设计二级聚...
|
| 关 键 词： | 太空电子枪 聚焦系统 光学系统 电子束 仿真分析 |
| 收稿时间： | 2020-11-03 |
Design and simulation of the optical system of 10 kV space electron gun |
| |
| Institution: | 1.School of Instrumentation and Optoelectronic Engineering, Beihang University, Beijing 100191, China2.Beijing Institute of Spacecraft Environment Engineering, Beijing 100094, China |
| |
| Abstract: | According to the performance requirement of the electron gun to be worked in the space environment, the optical system of 10 kV space electron gun is designed, along with simulation analysis. Firstly, the trajectory of the electron beam is obtained through the simulation with the proper cathode material. Then, the appropriate focal length is determined and a single-lens focusing system is simulated. In view of the restriction of the capability of the single-lens focusing system, a two-lens focusing system is designed to meet the requirements. A complete set of design methods and processes is given in this paper. The simulation results show that by the above methods, the electro-optical parameters can be optiized to meet the engineering requirements. This research can help the future design of space electron guns. |
| |
| Keywords: | |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《航天器环境工程》浏览原始摘要信息 |
| 点击此处可从《航天器环境工程》下载免费的PDF全文 |
|
