| 不同材料安装底座对冲击传感器灵敏度影响试验研究 |
| |
| 引用本文： | 尹钊,余抗,赵波.不同材料安装底座对冲击传感器灵敏度影响试验研究[J].航天器环境工程,2021,38(1):50-54. |
| |
| 作者姓名： | 尹钊 余抗 赵波 |
| |
| 作者单位： | 北京空间飞行器总体设计部,北京 100094;山东航天电子技术研究所,烟台 264006 |
| |
| 摘 要： | 传感器在航天器上螺接安装时需增加安装底座.针对聚酰亚胺等非金属材料安装底座可能存在降低冲击传感器安装谐振频率从而引起传感器灵敏度误差的问题设计铝合金材料安装底座,并分别进行冲击传感器不带安装底座、带聚酰亚胺安装底座和带铝合金安装底座3种情况下的灵敏度检定试验,以验证不同安装方式对冲击传感器灵敏度的影响.试验结果表明,安...
|
| 关 键 词： | 冲击传感器 灵敏度 安装底座 试验研究 |
| 收稿时间： | 2020-05-10 |
The effect of different materials used for installation base on the sensitivity of shock sensor |
| |
| Institution: | 1.Beijing Institute of Spacecraft System Engineering, Beijing 100094, China2.Shandong Institute of Space Electronic Technology, Yantai 264006, China |
| |
| Abstract: | In the in-orbit shock monitoring, the installation base made of nonmetallic materials such as polyimide may reduce the resonant frequency of the shock sensor installation, resulting in the linearity error of the sensor’s sensitivity. In view of that problem, the installation base made of aluminum alloy is designed, and the sensitive calibration tests of the shock sensor without the installation base and with the installation base made of polyimide/ aluminum alloy are carried out, respectively, to verify the extent of the influence of various installation ways on the sensitivity of the shock sensors. It is shown that the natural frequency increases significantly when the installation base is made of aluminum alloy. The error of the sensitivity of the shock sensor on the aluminum alloy base is as small as 5%, much lower than that on the polyimide base, and the former can successfully meets the requirement for the measurement error limit. |
| |
| Keywords: | |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《航天器环境工程》浏览原始摘要信息 |
| 点击此处可从《航天器环境工程》下载免费的PDF全文 |
|
