| 涂层刀具铣削加工300M钢的刀具磨损试验研究 |
| |
| 引用本文： | 张保国,陈志同,熊曦耀,黎旭东,蒋理科.涂层刀具铣削加工300M钢的刀具磨损试验研究[J].航空精密制造技术,2008,44(2):41-44. |
| |
| 作者姓名： | 张保国 陈志同 熊曦耀 黎旭东 蒋理科 |
| |
| 作者单位： | 1. 北京航空航天大学机械工程及自动化学院,北京,100083
2. 昌河飞机工业集团公司,景德镇,333002 |
| |
| 基金项目： | 国防科技应用基础研究基金 |
| |
| 摘 要： | 建立了一套便携式的在线刀具磨损图像检测装置及相应的计算程序,利用该装置观察到了涂层硬质合金刀具加工300M高强度钢过程的定性磨损规律,并确定了刀具磨损量的测量方法。
|
| 关 键 词： | 高强度钢 300M钢 涂层刀具 刀具耐用度 刀具磨损 磨损检测 |
| 文章编号： | 1003-5451(2008)02-0041-04 |
| 修稿时间： | 2007年10月15 |
Experimental Research on Tool Wear In Milling 300M with Coated Tool |
| |
| ZHANG Bao-guo,CHEN Zhi-tong,XIONG Xi-yao,et al.Experimental Research on Tool Wear In Milling 300M with Coated Tool[J].Aviation Precision Manufacturing Technology,2008,44(2):41-44. |
| |
| Authors: | ZHANG Bao-guo CHEN Zhi-tong XIONG Xi-yao |
| |
| Abstract: | A online tool wear image-catching apparatus was fabricated and a image processing program was developed. An orthogonal experiment was carried out to inspect the wear quantity VB when milling high strength steel 300M with the said coated milling tool. The tool wear process was analyzed and some qualitative rule was observed. A tool wear life equation with regard to the cutting parameters was established, which was very important in optimizing the cutting parameters when milling difficult-to-machine materials such as 300M steel. |
| |
| Keywords: | high strength steel 300M steel coated carbide tool tool life tool wear wear inspection |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
