| 铝合金锻件阳极氧化膜发黑缺陷控制技术研究 |
| |
| 引用本文： | 刘诗超,单俊杰. 铝合金锻件阳极氧化膜发黑缺陷控制技术研究[J]. 直升机技术, 2013, 0(2): 46-51 |
| |
| 作者姓名： | 刘诗超 单俊杰 |
| |
| 作者单位： | 海军驻景德镇地区航空军事代表室,江西景德镇,333002 |
| |
| 摘 要： | 研究了LC9CGS3铝合金锻件硫酸阳极氧化膜颜色发黑缺陷的控制技术.采用光学显微镜(OM)、扫描电子显微镜(SEM)和能谱分析仪(EDS)等分析技术,研究了LC9CGS3铝合金锻件硫酸阳极氧化膜颜色发黑缺陷的形成机理.结果表明,造成阳极氧化膜颜色发黑的原因是由于热处理不当.通过工艺试验分析,获得了再现阳极氧化膜颜色发黑缺陷的方法；通过加工流程的再造,获得了缺陷控制的技术；通过缺陷控制,大幅度地提高了产品的合格率.
|
| 关 键 词： | LC9CGS3铝合金锻件 缺陷再现 加工流程再造 |
Research of Control Technology of Aluminum Alloy Black Color Anodizing Film Defects |
| |
| LIU Shichao , SHAN Junjie. Research of Control Technology of Aluminum Alloy Black Color Anodizing Film Defects[J]. , 2013, 0(2): 46-51 |
| |
| Authors: | LIU Shichao SHAN Junjie |
| |
| Affiliation: | (Military Representative Bureau Based in Jingdezhen Area of Navy, Jingdezhen 333002, China) |
| |
| Abstract: | Control technology of the sulfuric acid anodic oxidation film color black LC9CGS3 alumi- num alloy forging defect was studied. By optical microscope （OM） , scanning electron microscopy （SEM） and energy dispersive spectroscopy （EDS） analysis technology,studied the sulfuric acid a- nodic oxidation film color black LC9CGS3 aluminum alloy forgings defects formation mechanism. Results showed that the cause of black anodized color was due to improper heat treatment. By process test analysis, we obtained the chining process reengineering,, got a proved the product percent of pass. representation method of black anodized color defects. By ma-defect control technology. Through defect control, greatly im- |
| |
| Keywords: | LC9CGS3 aluminum alloy forging defect reproduction process reengineering |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
