多循环脉冲爆震发动机概念化设计

为发展一种基于多循环爆震试验的新的脉冲爆震发动机结构设计方法，以汽油为燃料、空气为氧化剂，在内径为50mm的脉冲爆震发动机模型内产生了充分发展的脉冲爆震，根据试验结果对脉冲爆震发动机的结构参数进行了设计，设计结果更接近工程实际。研究发现，当发动机结构尺寸一定时，决定推力壁压力等效作用时间的经验常数K不是一个定值，而是随爆震频率的增大按一定函数关系减小，当爆震频率增大到一定程度时，经验常数的变化幅度逐渐减小并最终趋于常值3．90。根据得到的经验性的函数关系计算出单次爆震的经验常数K为5．35。

Conceptual design of multi-cycle pulse detonation engines

The purpose of this study is to develop a new method based on the multi-cycle detonation results. Fully developed repetitive C-J detonation waves are produced successfully by PDE model with its diameter 50mm using gasoline as fuel and air as oxidizer. The structural parameters of PDE are determined, which are more similar to the actual situation. It is found that experience constant (K) is not a fixed value and it decreases with increasing of the frequency by some function. When the frequency is increased to some extent, the experience constant (K) decreases flatly and tends to a fixed value of 3.90. According to the experimental function obtained, the experience constant (K) of single-cycle detonation equals to 5.35 by calculation.