| 杯形陶瓷CBN砂轮修整工艺及参数优化 |
| |
| 引用本文： | 刘佳,陈五一. 杯形陶瓷CBN砂轮修整工艺及参数优化[J]. 北京航空航天大学学报, 2012, 38(3): 374-379 |
| |
| 作者姓名： | 刘佳 陈五一 |
| |
| 作者单位： | 北京航空航天大学机械工程及自动化学院,北京,100191;北京航空航天大学机械工程及自动化学院,北京,100191 |
| |
| 摘 要： | 针对金刚石滚轮修整杯形CBN砂轮时各修整工艺参数对砂轮修整后磨削TC 4时的磨削温度、磨削力和表面粗糙度的影响进行实验研究,并对磨削温度和表面粗糙度进行了多因素回归分析.在回归分析得到的数学模型基础上,进一步对磨削温度和表面粗糙度进行双目标加权优化,得到了粗磨和精磨钛合金时砂轮的最佳修整参数,并通过磨削实验对优化结果进行了验证.
|
| 关 键 词： | 金刚石滚轮 陶瓷CBN砂轮 修整参数 回归分析 双目标加权优化 |
| 收稿时间： | 2010-11-09 |
Dressing process and parametric optimization of cup-shaped vitrified CBN wheels |
| |
| Liu Jia Chen Wuyi. Dressing process and parametric optimization of cup-shaped vitrified CBN wheels[J]. Journal of Beijing University of Aeronautics and Astronautics, 2012, 38(3): 374-379 |
| |
| Authors: | Liu Jia Chen Wuyi |
| |
| Affiliation: | School of Mechanical Engineering and Automation, Beijing University of Aeronautics and Astronautics, Beijing 100191, China |
| |
| Abstract: | Influences of dressing parameters on grinding temperatures,grinding forces and surface roughness in grinding TC 4 with cup-shaped CBN wheels dressed with a diamond roller under dry condition were investigated through experiments.Grinding temperatures and surface roughness were analyzed adopting regression method.Based on the mathematical models obtained by regression,weighted double-objective optimization was performed for lower grinding temperature and lower surface roughness.Finally,the optimal dressing parameters were calculated respectively for rough grinding and finish grinding and verified through grinding TC 4 experiments. |
| |
| Keywords: | diamond roller vitrified CBN wheel dressing parameters regression analysis weighted double-objective optimization |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《北京航空航天大学学报》浏览原始摘要信息 |
|
点击此处可从《北京航空航天大学学报》下载全文 |
