首页 | 本学科首页   官方微博 | 高级检索  
     

热障涂层的激光表面改性参数优化和结构设计
引用本文:郭磊,高远,辛会. 热障涂层的激光表面改性参数优化和结构设计[J]. 航空学报, 2021, 42(7): 424114-424114. DOI: 10.7527/S1000-6893.2020.24114
作者姓名:郭磊  高远  辛会
作者单位:天津大学材料科学与工程学院,天津 300072;天津市现代连接技术重点实验室,先进陶瓷与加工技术教育部重点实验室,天津 300072;天津大学材料科学与工程学院,天津 300072
基金项目:国家自然科学基金(51971156)
摘    要:热障涂层是航空发动机涡轮叶片关键核心技术之一,但在服役条件下常受环境沉积物、熔盐等的腐蚀而过早失效。激光表面改性是一种提高涂层抗腐蚀性能的有效办法,但改性涂层的激光工艺优化和结构设计亟待研究。本文采用脉冲Nd:YAG激光系统对Y2O3部分稳定ZrO2(YSZ)热障涂层进行表面改性,研究了激光功率、扫描速度以及光束长度对改性层厚度、微观结构的影响。结果表明,激光改性层呈致密的柱状晶结构,并有纵向裂纹贯穿其中。改性层的厚度与激光功率成正比,受扫描速度影响不大,与光束长度成反比。激光功率过高,则改性层裂纹增加明显;光束长度过大,则改性层与下方涂层的界面缺陷增多,不利于界面结合。优化的激光改性参数为:激光的功率为75~80 W,扫描速度8 mm/s,光束长度为160 mm。设计了双层激光改性层,每层中的纵向裂纹不连续,使得整个改性层中无贯穿的纵向裂纹,有助于抑制高温腐蚀熔体的内渗。

关 键 词:热障涂层  高温腐蚀  激光改性  参数优化  结构设计
收稿时间:2020-04-20
修稿时间:2020-05-18

Laser modification parameters optimization and structural design of thermal barrier coatings
GUO Lei,GAO Yuan,XIN Hui. Laser modification parameters optimization and structural design of thermal barrier coatings[J]. Acta Aeronautica et Astronautica Sinica, 2021, 42(7): 424114-424114. DOI: 10.7527/S1000-6893.2020.24114
Authors:GUO Lei  GAO Yuan  XIN Hui
Affiliation:1. School of Materials Science and Engineering, Tianjin University, Tianjin 300072, China;2. Tianjin Key Laboratory of Advanced Joining Technology, Key Lab of Advanced Ceramics and Machining Technology of Ministry of Education, Tianjin 300072, China
Abstract:Thermal Barrier Coating (TBC) is one of the key technologies of aero engine turbine blades, but it often fails prematurely due to the corrosion resulting from environmental deposits and molten salts under service conditions. Laser surface modification has been considered as an effective way to improve the corrosion resistance of TBCs, but the laser process optimization and structure design of the modified coating need to be studied urgently. In this study, the surfaces of Y2O3 partially stabilized ZrO2 (YSZ) TBCs are modified by a pulsed Nd: YAG laser system. The results showed that the laser modified layer had a dense columnar crystal microstructure, and longitudinal cracks ran through it. The thickness of the modified layer was directly proportional to the laser power, little affected by the scanning speed, and inversely proportional to the beam length. When the laser power is too high, more cracks formed in the modified layer; when the beam length increased, the interface defects between the modified layer and the underlying coating increased, harmful to the interface bonding. The optimized laser modification parameters are: the laser power was 75-80 W, the scanning speed is 8 mm/s, and the beam length is 160 mm. A double-layer laser modified layer is designed. The longitudinal cracks in each layer are discontinuous, which made the whole modified layer free of longitudinal cracks, helpful to suppress the infiltration of corrosion melt at high temperatures.
Keywords:Thermal bBarrier Coatings (TBCs)  high temperature corrosion  laser modification  parameter optimization  structural design  
本文献已被 万方数据 等数据库收录!
点击此处可从《航空学报》浏览原始摘要信息
点击此处可从《航空学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号