| 第三代航空齿轮钢圆柱齿轮弯曲疲劳强度性能测试分析 |
| |
| 引用本文： | 唐鑫,朱如鹏,廖梅军,熊兴波,唐朋. 第三代航空齿轮钢圆柱齿轮弯曲疲劳强度性能测试分析[J]. 航空动力学报, 2021, 36(8): 1756-1764. DOI: 10.13224/j.cnki.jasp.20200559 |
| |
| 作者姓名： | 唐鑫 朱如鹏 廖梅军 熊兴波 唐朋 |
| |
| 作者单位： | 南京航空航天大学直升机传动技术重点实验室,南京210016;中国航空发动机集团有限公司湖南动力机械研究所直升机传动技术重点实验室,湖南株洲412002;南京航空航天大学直升机传动技术重点实验室,南京210016;中国航空发动机集团有限公司湖南动力机械研究所直升机传动技术重点实验室,湖南株洲412002 |
| |
| 基金项目： | 国家基金面上项目（51975274）； 南京航空航天大学“直升机传动技术重点实验室”开放课题（HTL-O-20K02） |
| |
| 摘 要： | 以第三代航空齿轮钢圆柱齿轮的弯曲疲劳性能作为研究对象,修正了国标(GB)给出的齿轮弯曲夹具计算公式,设计了弯曲疲劳试验用圆柱齿轮参数,并对该材料的齿轮进行了弯曲疲劳试验.通过对试验结果数据采用对数正态分布、二参数威布尔分布数据处理方法对试验数据进行了处理,得到了该材料的试验齿轮弯曲疲劳极限及可靠-应力-寿命(R-S-N...
|
| 关 键 词： | 第三代航空齿轮钢 弯曲疲劳强度 R-S-N曲线 疲劳极限 弯曲夹具 |
| 收稿时间： | 2020-12-27 |
Analyse bending fatigue strength test of cylindrical gear of third-generation aviation gear steel |
| |
| TANG Xin,ZHU Rupeng,LIAO Meijun,XIONG Xingbo,TANG Peng. Analyse bending fatigue strength test of cylindrical gear of third-generation aviation gear steel[J]. Journal of Aerospace Power, 2021, 36(8): 1756-1764. DOI: 10.13224/j.cnki.jasp.20200559 |
| |
| Authors: | TANG Xin ZHU Rupeng LIAO Meijun XIONG Xingbo TANG Peng |
| |
| Affiliation: | 1. National Key Laboratory of Science and Technology on Helicopter Transmission, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China;2. Science and Technology on Helicopter Transmission Laboratory, Hunan Aviation Powerplant Research Institute, Aero Engine corporation of China, Zhuzhou Hunan 412002, China |
| |
| Abstract: | Taking the third-generation aviation gear steel gear as the research object, the bending fatigue test of the cylindrical gear made of this material was carried out. The cylindrical gear for bending fatigue test was designed, and the calculation formula of the GB standard gear bending fixture was revised. The bending fatigue test was carried out for the gear of the material. The experimental data were analyzed, and the log -normal distribution and two -parameter Weibull distribution data processing methods were used to fit the data. The bending fatigue limit and R-S-N curve of the test gear were obtained. The performance of test gears and 9310 steel gear was compared and analyzed. The results showed that under the condition of 95% confidence degree and 99% reliability, the bending stress limit of 9310 steel gear was 602 MPa and the bending stress limit of the third-generation aviation gear steel gear was 687. 6 MPa. The bending fatigue performance of the third-generation aviation gear steel gear was 14. 2% higher than that of the 9310 steel,presenting great advantage in aviation gear transmission. |
| |
| Keywords: | third-generation aviation gear steel bending fatigue strength R-S-N curve fatigue limit bending fixture |
| 本文献已被 万方数据 等数据库收录！ |
| 点击此处可从《航空动力学报》浏览原始摘要信息 |
|
点击此处可从《航空动力学报》下载全文 |
|
