首页 | 本学科首页   官方微博 | 高级检索  
     检索      

空间光学遥感器主镜展开机构重复定位精度分析
引用本文:刘志全,孙国鹏.空间光学遥感器主镜展开机构重复定位精度分析[J].中国空间科学技术,2008,28(1):27-34.
作者姓名:刘志全  孙国鹏
作者单位:中国空间技术研究院,中国空间技术研究院 北京100094,北京100094
摘    要:提出了基于赫兹接触理论的空间光学遥感器主镜展开机构重复定位精度分析方法,利用该方法分别对Boyes支承和Kelvin支承在两种典型布置方式下进行重复定位误差分析。分析结果表明:Boyes支承的重复定位误差受锁紧力不一致性的影响比Kelvin支承要小;增大定位球直径可以减小因锁紧力不一致性而引起的重复定位误差(绝对值),并且减小的趋势逐渐变缓;在对接面内与旁瓣转轴方向相垂直的方向上,重复定位误差对锁紧力位置误差最为敏感。

关 键 词:重复定位精度  展开机构  主镜  遥感器  空间光学  
收稿时间:2007-07-02
修稿时间:2007-09-30

Analysis of Repeatability of the Primary Mirror Deployment Mechanism for Space Optical Remote Sensors
Liu Zhiquan,Sun Guopeng.Analysis of Repeatability of the Primary Mirror Deployment Mechanism for Space Optical Remote Sensors[J].Chinese Space Science and Technology,2008,28(1):27-34.
Authors:Liu Zhiquan  Sun Guopeng
Abstract:Based on the Hertz contact theory,an analysis method for the repeatability of the primary mirror deployment mechanism was put forward.By this method,the repeatability of the Boyes couplings and Kelvin couplings arranging in two typical modes were analyzed.The analysis results show that the repeat position error of the Boyes coupling caused by the inconsistency of the locking force is less than that of the Kelvin coupling.The repeat position error(absolute value) caused by the inconsistency of the locking force decreases slowly as the diameters of the location balls increase.In the perpendicular direction to the rotation axis of the petal,the repeat position error is most sensitive to the position error of the locking force.
Keywords:Repeatability Deployment mechanism Primary mirror Remote sensor Space optics
本文献已被 维普 万方数据 等数据库收录!
点击此处可从《中国空间科学技术》浏览原始摘要信息
点击此处可从《中国空间科学技术》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号