| 表面粗糙度对铍青铜微电阻点焊接头性能的影响 |
| |
| 引用本文： | 徐春容,黄永德.表面粗糙度对铍青铜微电阻点焊接头性能的影响[J].南昌航空工业学院学报,2007,21(2):63-66. |
| |
| 作者姓名： | 徐春容 黄永德 |
| |
| 作者单位： | 南昌航空大学江西 南昌330063 |
| |
| 摘 要： | 通过改变铍青铜表面粗糙度,研究了表面粗糙度对微电阻点焊接头强度和焊点组织形貌的影响。结果表面:当表面粗糙度小于0.5μm时,接头拉剪载荷随着表面粗糙度的增大而增大;当表面粗糙度大于0.5μm时,焊接电流不同,表面粗糙度对接头拉剪载荷的影响不同。表面粗糙度的变化基本不对接头组织形貌产生影响。铍青铜微电阻点焊接头由焊核、焊核周围的热影响区以及由焊核向热影响区过渡的熔合区组成。
|
| 关 键 词： | 微电阻点焊 铍青铜 表面粗糙度 接头性能 |
| 文章编号： | 1001-4926（2007）02-0063-04 |
| 收稿时间： | 2007-03-04 |
| 修稿时间： | 2007年3月4日 |
Effects of surface roughness on joints properties in small-scale resistance spot welding of beryllium copper |
| |
| XU Chun-rong,HUANG Yong-de.Effects of surface roughness on joints properties in small-scale resistance spot welding of beryllium copper[J].Journal of Nanchang Institute of Aeronautical Technology(Natural Science Edition),2007,21(2):63-66. |
| |
| Authors: | XU Chun-rong HUANG Yong-de |
| |
| Abstract: | The effect of sheet surface roughness on mechanical properties and microstructure of the joint was studied in small-scale resistance spot welding of beryllium copper under different surface roughness condition.The result shows that the surface roughness affects the mechanical properties significantly when the welding current is small.It has little effect on mechanical properties when surface roughness increases.Surface roughness has little effect on microstructure of the joint. |
| |
| Keywords: | small-scale resistance spot welding beryllium copper surface roughness joint properties |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
